SE10PB Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount ESD Capability Rectifiers

New Product
SE10Pb thru SE10PJ
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
eSMP ^® Series
DO-220AA (SMP)
PRIMARY CHARACTERISTICS
I_F(AV)
1.0 A
V_RRM
100 V to 600 V
I_R
5 μA
V_F at I_F = 1.0 A
0.86 V
T_J max.
175 °C
TYPICAL APPLICATIONS
General purpose, polarity protection, and rail-to-rail
protection in both consumer and automotive applications.
FEATURES
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop
• Typical I_R less than 0.1 μA
• ESD capability
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL SE10PB
Device marking code
10B
Maximum repetitive peak reverse voltage
Average forward current
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
V_RRM
I_F(AV)
I_FSM
100
Operating junction and storage temperature range
T_J, T_STG
SE10PD SE10PG
10D
10G
200
400
1.0
25
- 55 to + 175
SE10PJ
10J
600
UNIT
V
A
A
°C
Document Number: 89024 For technical questions within your region, please contact one of the following:
Revision: 19-Apr-11
[e-mail], [e-mail], [e-mail]
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000