SBYV26C Datasheet, PDF (1/2 Pages) Vishay Siliconix – Glass Passivated Ultrafast Rectifier

New Product
SBYV26C
Vishay Semiconductors
formerly General Semiconductor
Glass Passivated Ultrafast Rectifier
DO-204AL (DO-41)
Features
Reverse Voltage 600V
Forward Current 1.0A
®
0.107 (2.7)
0.080 (2.0)
DIA.
Patented*
Dimensions in inches
and (millimeters)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
*Glass-plastic
encapsulation
technique is
covered by
Patent No.
3,996,602, and
brazed-lead
assembly by
Patent No.
3,930,306
• High temperature metallurgically bonded construction
• Cavity-free glass passivated junction
• Ultrafast recovery time for high efficiency
• Low forward voltage, high current capability
• Capable of meeting environmental standards of
MIL-S-19500
• Hermetically sealed package
• Low leakage current • High surge current capability
• Specified reverse surge capability
• High temperature soldering guaranteed: 350°C/10 seconds,
0.375" (9.5mm) lead length,5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AL, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any Weight: 0.012 oz., 0.3 g
Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted)
Parameter
Symbol
Value
Maximum repetitive peak reverse voltage
VRRM
600
Maximum RMS voltage
VRMS
420
Maximum DC blocking voltage
VDC
600
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL = 85°C (See Fig. 1)
IF(AV)
1.0
Peak forward surge current 10ms single half
sine-wave superimposed on rated load
IFSM
30
Non repetitive peak reverse energy (Note 1)
ERSM
5
Typical thermal resistance (Note 2,3)
RΘJA
70
RΘJL
16
Operating junction and storage temperature range
TJ, TSTG
–65 to +175
Unit
V
V
V
A
A
mJ
°C/W
°C
Electrical Characteristics (TA = 25°C unless otherwise noted)
Minimum avalanche breakdown voltage at 100µA
VBR
Maximum instantaneous
forward voltage at 1.0A
TJ = 25°C
TJ = 175°C
VF
Maximum DC reverse current
at rated DC blocking voltage
TA = 25°C
TA = 165°C
IR
Max. reverse recovery time at IF = 0.5A, IR = 1.0A, Irr = 0.25A
trr
Maximum junction capacitance at 4.0V, 1MHz
CJ
Maximum reverse recovery current slope
at IF = 1A, VR = 30V, dif/dt = –1A/µs
dir/dt
600
V
2.5
1.3
V
5.0
150
µA
30
ns
45
pF
7
A/µs
Notes: (1) Peak reverse energy measured with 8/20µs surge
(2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads
(3) Thermal resistance from junction to lead at 0.375” (9.5mm) lead length with both leads attached to heatsink
Document Number 88735
11-Feb-02
www.vishay.com
1