SBL2030PT Datasheet, PDF (1/4 Pages) Diodes Incorporated – 20A SCHOTTKY BARRIER RECTIFIER

SBL2030PT & SBL2040PT
Vishay General Semiconductor
Dual Common-Cathode Schottky Rectifier
3
2
1
TO-247AD (TO-3P)
PIN 1
PIN 3
PIN 2
CASE
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F
T_J max.
20 A
30 V, 40 V
250 A
0.60 V
125 °C
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of
switching mode power supplies, freewheeling diodes,
dc-to-dc converters or polarity protection application.
MECHANICAL DATA
Case: TO-247AD (TO-3P)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current (Fig. 1)
Peak forward surge current, 8.3 ms single half
sine-wave superimposed on rated load per diode
V_RRM
V_RWM
V_DC
I_F(AV)
I_FSM
Operating junction and storage temperature range
T_J, T_STG
SBL2030PT
SBL2040PT
30
40
21
28
30
40
20
250
- 40 to + 125
UNIT
V
V
V
A
A
°C
ELECTRICAL CHARACTERISTICS (T_A = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS SYMBOL
SBL2030PT
Maximum instantaneous forward
voltage per diode ⁽¹⁾
10 A
V_F
0.6
Maximum instantaneous reverse
current at rated DC blocking
voltage per diode ⁽¹⁾
T_C = 25 °C
T_C = 100 °C
I_R
1.0
50
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
SBL2040PT
UNIT
V
mA
Document Number: 88728 For technical questions within your region, please contact one of the following:
Revision: 25-Mar-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1