SBL10X0CT Datasheet, PDF (1/6 Pages) Vishay Siliconix – Dual Common Cathode Schottky Rectifier

www.vishay.com
SBL10x0CT, SBLF10x0CT, SBLB10x0CT
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
TO-220AB
ITO-220AB
SBL10x0CT
PIN 1
PIN 2
PIN 3
CASE
3
2
1
TO-263AB
K
123
SBLF10x0CT
PIN 1
PIN 2
PIN 3
2
1
SBLB10x0CT
PIN 1
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F
T_J max.
Package
2x5A
30 V to 40 V
175 A
0.55 V
125 °C
TO-220AB, ITO-220AB, TO-263AB
Diode variations
Common cathode
FEATURES
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_C = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current 
at T_C = 107 °C
total device
per diode
V_RRM
V_RWM
V_DC
I_F(AV)
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load per diode
I_FSM
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
T_J, T_STG
V_AC
SBL1030CT SBL1040CT
30
40
21
28
30
40
10
5.0
175
- 40 to + 125
1500
UNIT
V
A
°C
V
Revision: 12-Jun-13
1
Document Number: 88726
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000