|
SB220S_15 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Schottky Barrier Plastic Rectifier | |||
|
www.vishay.com
SB220S, SB230S, SB240S, SB250S, SB260S
Vishay General Semiconductor
Schottky Barrier Plastic Rectifier
DO-204AL (DO-41)
FEATURES
⢠Guardring for overvoltage protection
⢠Very small conduction losses
⢠Extremely fast switching
⢠Low forward voltage drop
⢠High forward surge capability
⢠High frequency operation
⢠Solder dip 275 °C max. 10 s, per JESD 22-B106
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF
TJ max.
Package
2.0 A
20 V, 30 V, 40 V, 50 V, 60 V
50 A
0.55 V, 0.70 V
125 °C, 150 °C
DO-204AL
Diode variations
Single
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications.
MECHANICAL DATA
Case: DO-204AL (DO-41)ï
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102ï
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL SB220S SB230S SB240S SB250S SB260S UNIT
Maximum repetitive peak reverse voltage
Maximum average forward rectified currentï
at 0.375" (9.5 mm) lead length (fig. 1)
VRRM
20
30
40
50
60
V
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-waveï
superimposed on rated load
IFSM
50
A
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
dV/dt
TJ
TSTG
10 000
- 65 to + 125
- 65 to + 150
- 65 to + 150
V/μs
°C
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS SYMBOL SB220S SB230S SB240S SB250S SB260S UNIT
Maximum instantaneous forward voltage
Maximum reverse current at rated VR
2.0 A
TJ = 25 °C
TJ = 125 °C
VF (1)
IR (2)
0.55
0.50
25
0.70
V
mA
15
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ï£ 40 ms
Revision: 20-Jan-14
1
Document Number: 88951
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |