English
Language : 

S102C Datasheet, PDF (1/6 Pages) Vishay Siliconix – High Precision Foil Resistor with TCR of ± 2.0 ppm/°C, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %
S Series
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %
Any value at any tolerance available within resistance range
INTRODUCTION
Bulk Metal® Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications. BMF
technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
Model S Series made from Vishay BMF offers low TCR,
excellent load life stability, tight tolerance, fast response
time, low current noise, low thermal EMF and low voltage
coefficient, all in one resistor.
FEATURES
• Temperature coefficient of resistance (TCR):
- 55 °C to + 125 °C, 25 °C ref.
− S102C series: ± 2 ppm/°C typical (see table 1)
Pb-free
Available
− S102K series: ± 1 ppm/°C typical (see table 1) RoHS*
• Rated power: to 1 W at + 125 °C
COMPLIANT
• Tolerance: ± 0.005 %
• Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
• Resistance range: 0.5 Ω to 1 MΩ (higher or lower values of
resistance are available)
• Electrostatic discharge above 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns without ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Low inductance: < 0.08 µH typical
• Non hot spot design
• Terminal finishes available: lead (Pb)-free
tin/lead alloy
• Matched sets are available per request
(TCR Tracking: to 0.5 ppm/°C)
• For better TCR and PCR performances please review the
Z201 datasheet
The S Series is virtually insensitive to destabillizing factors.
The resistor element is a solid alloy that displays the
desirable bulk properties of its parent material, thus it is
inherently stable and noise free.
Vishay’s Bulk Metal® S Series resistors are the modern
generation of precision resistors. The standard design of
these resistors provides a unique combination of
characteristics found in no other single resistor.
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
TABLE 1 - RESISTANCE VERSUS TCR
(- 55 °C to + 125 °C, + 25 °C Ref.)
RESISTOR
RESISTANCE
VALUE (Ω)
TYPICAL TCR AND
MAX SPREAD
(ppm/°C)
S102(C)
S102(K)
80 to < 150K
80 to < 100K
± 2 ± 2.5
± 1 ± 2.5
S102(C)
S102(K)
S102(C)
S102(K)
50 to < 80
1 to < 50
± 2 ± 3.5
± 1 ± 3.5
± 2 ± 4.5
± 1 ± 4.5
APPLICATIONS
• High precision amplifiers
• Down-hole (high temperature)
• High precision instrumentation
• Medical and test equipment
• Industrial
• Audio (high end stereo equipment)
• EB applications (electron beam scanning and recording
equipment, electron microscopes)
• Military, airborne
• Measurement instrumentation
FIGURE 1 - FOIL RESISTOR TCR COMPARISON OF
FOIL ALLOYS IN MILITARY RANGE
+ 150
+ 100
+ 50
ΔR
R0
(ppm)
- 50
1 ppm/°C
- 100
- 150
2 ppm/°C
- 200
- 50 - 25
- 55
C Alloy
2 ppm/°C
0 + 25 + 50 + 75 + 100 + 125
K Alloy
1 ppm/°C
Temperature (°C)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63001
Revision: 20-Nov-07
For any questions, contact: foil@vishay.com
www.vishay.com
1