RNX0381M00FKEL Datasheet, PDF (1/4 Pages) Vishay Siliconix – Metal Oxide Resistors, Special Purpose, High Voltage

www.vishay.com
RNX
Vishay Dale
Metal Oxide Resistors, Special Purpose, High Voltage
FEATURES
• Low TCR: ± 200 ppm/°C standard;
± 100 ppm/°C; ± 50 ppm/°C available
• Tolerance: ± 1 % standard to 1 G; ± 5 %
above 1 G; ± 0.5 % available in ± 50 ppm/°C
only. Special tolerance and/or temperature
coefficient matching available.
• High voltage (up to 8 kV)
• For oil bath or open air operation
• Matched sets available
• Special testing available upon request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
P_{25 °C} ⁽¹⁾
W
P_{70 °C} ⁽¹⁾
W
P_{125 °C} ⁽¹⁾
W
MAXIMUM
WORKING
VOLTAGE ⁽²⁾
V
RESISTANCE
RANGE ⁽³⁾

TOLERANCE
±%
RNX025
RNX-1/4
0.5
0.36
0.25
RNX038
RNX-3/8
1.0
0.72
0.5
RNX050
RNX-1/2
1.2
0.86
0.6
RNX075
RNX-3/4
2.0
1.44
1.0
RNX100
RNX-1
2.5
1.8
1.25
RNX125
RNX-1-1/4
3.0
2.16
1.5
RNX150
RNX-1-1/2
4.0
2.88
2.0
RNX200
RNX-2
5.0
3.6
2.5
750
1.5K
2K
3K
4K
5K
6K
8K
1M to 22M
1K to 100M
100 to 100K
1M to 50M
1K to 100M
1K to 1G
100 to 100K
1M to 100M
1K to 250M
1K to 2G
100 to 100K
1M to 100M
1K to 500M
1K to 2G
100 to 100K
1M to 100M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
Notes
• All resistance values are calibrated at 100 V_DC. Calibration at other voltages available.
• Part marking: Print marked - DALE, model, value, tolerance, TCR, date code (model and date omitted on RNX-1/4)
• Special modifications:
- Special preconditioning (power aging, temperature cycling etc.) to customer specifications
- Non-helixed resistors can be supplied for critical high frequency applications (non-inductive)
(1) _{Increase wattage by 25 % for 0.032" (0.813 mm) diameter leads}
(2) _{Continuous working voltage shall be P x R or maximum working voltage, whichever is less.}
(3) _{For resistance values above and below those listed please contact us}
(4) _{Non-inductive ± 200 ppm/°C TCR only}
TEMPERATURE
COEFFICIENT
± ppm/°C
50
100, 200
Non-inductive ⁽⁴⁾
50
100
200
Non-inductive ⁽⁴⁾
50
100
200
Non-inductive ⁽⁴⁾
50
100
200
Non-inductive ⁽⁴⁾
50
100
200
Non-inductive ⁽⁴⁾
100
200
Non-inductive ⁽⁴⁾
100
200
Non-inductive ⁽⁴⁾
100
200
Non-inductive ⁽⁴⁾
Revision: 19-Sep-12
1
Document Number: 31032
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000