RCWE1206R560FKEA Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Surface Mount Chip Resistor, Wraparound, Extremely Low Value (0.01 Ω to 0.976 Ω)

www.vishay.com
RCWE
Vishay Dale
Thick Film Surface Mount Chip Resistors,
Wraparound, Extremely Low Value (0.01  to 0.976 )
FEATURES
• Extremely low resistance values 
(0.01  to 0.976 )
• Suitable for current sensing and shunts
• Metal glaze on high quality ceramic
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• AEC-Q200 qualified, rev. C compliant
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL 
MODEL
RCWE0402
RCWE0603
RCWE0805
RCWE1206
RCWE1210
RCWE2010
RCWE2512
POWER RATING
CASE SIZE
P_{70 °C}
W
0402
0.125
0603
0.2
0805
0.25
1206
0.5
1210
1.0
2010
1.0
2512
2.0
TEMPERATURE
COEFFICIENT
± ppm/°C
400
200
100
700
400
200
100
400
300
200
100
600
300
200
100
500
300
200
100
600
300
200
100
600
300
200
100
RESISTANCE
RANGE

0.033 to 0.05
0.051 to 0.18
0.2 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.1
0.11 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.05
0.051 to 0.976
0.010 to 0.018
0.02 to 0.03
0.033 to 0.05
0.051 to 0.976
TOLERANCE
±%
5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
5.0
1.0, 5.0
1.0, 5.0
0.5, 1.0, 5.0 ⁽¹⁾
E-SERIES
24
24
24
24
24
24
24
Notes
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
• Part marking: Reference “Surface Mount Resistor Marking” (document number 20020).
(1) _{Tight tolerance of 0.5 % is available for resistance values above 0.200 .}
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)
R CWE 0 6 0 3 5 1 L 0 F N E A
GLOBAL MODEL
(8 digits)
RCWE0402
RCWE0603
RCWE0805
RCWE1206
RCWE1210
RCWE2010
RCWE2512
VALUE
(4 digits)
L = m *
R = Decimal
10L0 = 0.01 
R470 = 0.47 
Note:
* Use “L” for resistance
values < 0.1 
TOLERANCE
(1 digit)
D = ± 0.5 %
F = ± 1.0 %
J = ± 5.0 %
TCR
(1 digit)
K = ± 100 ppm/°C
N = ± 200 ppm/°C
M = ± 300 ppm/°C
Q = ± 400 ppm/°C
P = ± 500 ppm/°C
T = ± 600 ppm/°C
G = ± 700 ppm/°C
PACKAGING
(2 digits)
EA = Lead (Pb)-free,
tape/reel
Revision: 18-Nov-13
1
Document Number: 20019
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000