RCWE0603R330FKEA Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Surface Mount Chip Resistors, Wraparound, Extremely Low Value

www.vishay.com
RCWE
Vishay Dale
Thick Film Surface Mount Chip Resistors,
Wraparound, Extremely Low Value (0.01  to 0.976 )
FEATURES
• Extremely low resistance values
(0.01  to 0.976 )
• Suitable for current sensing and shunts
• Metal glaze on high quality ceramic
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
POWER RATING
CASE SIZE
P_{70 °C}
W
TEMPERATURE
COEFFICIENT
± ppm/°C
RESISTANCE
RANGE

TOLERANCE
±%
E-SERIES
400
0.033 to 0.05
5.0
RCWE0402
0402
0.125
200
0.051 to 0.18
1.0, 5.0
24
100
0.2 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
700
0.010 to 0.018
5.0
RCWE0603
0603
0.2
400
200
0.02 to 0.03
0.033 to 0.1
1.0, 5.0
1.0, 5.0
24
100
0.11 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
400
0.010 to 0.018
5.0
RCWE0805
0805
0.25
300
200
0.02 to 0.03
0.033 to 0.05
1.0, 5.0
1.0, 5.0
24
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
600
0.010 to 0.018
5.0
RCWE1206
1206
0.5
300
200
0.02 to 0.03
0.033 to 0.05
1.0, 5.0
1.0, 5.0
24
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
500
0.010 to 0.018
5.0
RCWE1210
1210
1.0
300
200
0.02 to 0.03
0.033 to 0.05
1.0, 5.0
1.0, 5.0
24
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
600
0.010 to 0.018
5.0
RCWE2010
2010
1.0
300
200
0.02 to 0.03
0.033 to 0.05
1.0, 5.0
1.0, 5.0
24
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
600
0.010 to 0.018
5.0
RCWE2512
2512
2.0
300
200
0.02 to 0.03
0.033 to 0.05
1.0, 5.0
1.0, 5.0
24
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
Notes
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
• Part marking: Reference “Surface Mount Resistor Marking” (document number 20020).
(1) _{Tight tolerance of 0.5 % is available for resistance values above 0.200 .}
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)
R CWE 0 6 0 3 5 1 L 0 F N E A
GLOBAL MODEL
(8 digits)
RCWE0402
RCWE0603
RCWE0805
RCWE1206
RCWE1210
RCWE2010
RCWE2512
VALUE
(4 digits)
L = m *
R = Decimal
10L0 = 0.01 
R470 = 0.47 
Note:
* Use “L” for resistance
values < 0.1 
TOLERANCE
(1 digit)
D = ± 0.5 %
F = ± 1.0 %
J = ± 5.0 %
TCR
(1 digit)
K = ± 100 ppm/°C
N = ± 200 ppm/°C
M = ± 300 ppm/°C
Q = ± 400 ppm/°C
P = ± 500 ppm/°C
T = ± 600 ppm/°C
G = ± 700 ppm/°C
PACKAGING
(2 digits)
EA = Lead (Pb)-free,
tape/reel
Revision: 07-Mar-13
1
Document Number: 20019
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000