RCWE Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Surface Mount Chip Resistors,

www.vishay.com
RCWE
Vishay Dale
Thick Film Surface Mount Chip Resistors,
Wraparound, Extremely Low Value (0.01  to 0.976 )
FEATURES
• Extremely low resistance values 
(0.01  to 0.976 )
• Enhanced power rating due to long side terminal
construction (0612, 1020 types)
• Suitable for current sensing and shunts
• Metal glaze on high quality ceramic
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL 
MODEL
POWER RATING
CASE SIZE
P_{70 °C}
W
TEMPERATURE
COEFFICIENT
± ppm/°C
RESISTANCE
RANGE

TOLERANCE
±%
E-SERIES ⁽²⁾
RCWE0402
0402
0.125
400
0.033 to 0.05
5.0
24
200
0.051 to 0.18
1.0, 5.0
100
0.2 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
24; 96
RCWE0603
0603
0.2
RCWE0805
0805
0.25
RCWE0612
0612
1.0
700
0.010 to 0.018
5.0
24
400
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.105
1.0, 5.0
24; 96
100
0.11 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
400
0.010 to 0.018
5.0
24
300
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.05
1.0, 5.0
24; 96
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
300
0.010 to 0.016
2.0, 5.0
24
200
0.018 to 0.2
2.0, 5.0
100
0.205 to 0.976
1.0, 5.0
24; 96
600
0.010 to 0.018
5.0
24
RCWE1206
1206
0.5
300
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.05
1.0, 5.0
24; 96
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
RCWE1210
1210
1.0
RCWE1020
1020
2.0
500
0.010 to 0.018
5.0
24
300
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.05
1.0, 5.0
24; 96
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
200
0.010 to 0.016
2.0, 5.0
24
100
0.0162 to 0.976
1.0, 5.0
24; 96
RCWE2010
2010
1.0
600
0.010 to 0.018
5.0
24
300
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.05
1.0, 5.0
24; 96
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
600
0.010 to 0.018
5.0
24
RCWE2512
2512
2.0
300
0.02 to 0.03
1.0, 5.0
200
0.033 to 0.05
1.0, 5.0
24; 96
100
0.051 to 0.976
0.5, 1.0, 5.0 ⁽¹⁾
Notes
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
• Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020).
(1) _{Tight tolerance of 0.5 % is available for resistance values above 0.200 .}
(2) _{Use E24 decade values for 5.0 % tolerance parts and E96 decade values for 0.5 % and 1.0 %. Refer to Standard Decade Table}
(www.vishay.com/doc?31001).
Revision: 07-Oct-15
1
Document Number: 20019
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000