RCVE3 Datasheet, PDF (1/5 Pages) Vishay Siliconix – High Voltage (up to 0.5 kV) Thick Film Chip Resistors

www.vishay.com
RCV e3
Vishay Draloric
High Voltage (up to 0.5 kV) Thick Film Chip Resistors
FEATURES
• High operating voltage (up to 500 V)
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• Metal glaze on high quality ceramic
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER
RATING
P₇₀
W
LIMITINGELEMENT
VOLTAGE U_MAX.
AC_RMS/DC
V
TEMPERATURE
COEFFICIENT
± ppm/K
TOLERANCE
±%
RESISTANCE
RANGE

SERIES
RCV0805 e3 0805 RR 2012M 0.125
400
100
1
E24; E96
100K to 10M
200
5
E24
RCV1206 e3 1206 RR 3216M 0.25
500
100
1
E24; E96
100K to 10M
200
5
E24
Notes
• These resistors do not feature a lifetime limitation when operated within the limits of rated dissipation, permissible operating voltage and
permissible film temperature. However, the resistance typically increases due to the resistor’s film temperature over operating time, generally
known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional lifetime.
• No marking.
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
TECHNICAL SPECIFICATIONS
PARAMETER
Rated dissipation P₇₀ ⁽¹⁾
Limiting element voltage U_max. AC_RMS/DC
Insulation voltage U_ins. (1 min)
Voltage coefficient of resistance chart
Insulation resistance
UNIT
W
V
V
ppm/V

RCV0805
0.125
400
> 500
25
> 10⁹
RCV1206
0.25
500
Operating temperature range
°C
- 55 to + 155
Weight
mg
5.5
10
Note
(1) _{The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: RCV1206100KFKEA
RCV 1 2 0 6 1 0 0KFKEA
MODEL
RESISTANCE
TOLERANCE
RCV0805
RCV1206
K = Thousand
M = Million
F=±1%
J=±5%
Product Description: RCV1206 100 100K 1 % ET1 e3
RCV1206
100
100K
1%
TCR
K = ± 100 ppm/K
N = ± 200 ppm/K
ET1
MODEL
RCV0805
RCV1206
TCR
± 100 ppm/K
± 200 ppm/K
RESISTANCE
100K = 100 k
10M = 10 M
TOLERANCE
±1%
±5%
PACKAGING
ET1, ET5, ET6
PACKAGING
EA, EB, EC
e3
LEAD (Pb)-FREE
e3 = Pure tin
termination finish
Revision: 27-Mar-13
1
Document Number: 20054
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000