RCP Datasheet, PDF (1/4 Pages) Welwyn Components Limited – Precision Metal Film Resistors

www.vishay.com
RCP
Vishay Dale
Thick Film Chip Resistors, Industrial, High Power,
Aluminum Nitride Substrate
Aluminum nitride
over 3 x more power - same size
MATERIAL SPECIFICATIONS
Resistive element
Ruthenium oxide
Encapsulation
Epoxy
Substrate
Aluminum nitride
Termination
Solder-coated nickel barrier
Solder finish
Pure tin or tin/lead solder alloy
FEATURES
• Thick film resistive element on an aluminum
nitride (AlN) substrates
Available
• Very high thermal conductivity in a small
package size
• Termination: tin/lead wraparound termination
over nickel barrier. Also available with
lead (Pb)-free wraparound terminations.
Available
• Capability to develop specific reliability
programs designed to customer requirements
• Operating temperature range: -55 °C to +155 °C
• High frequency performance to 6 GHz
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CASE
SIZE
POWER RATING ⁽¹⁾
(Standard
Board Mount)
P_{25 °C}
W
POWER RATING ⁽¹⁾
(Active
Temperature
Control)
W
MAXIMUM
WORKING
VOLTAGE
V
RESISTANCE
RANGE

TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
RCP0505
0505
1.4
5.0
P xR
10 to 2K
1, 2, 5
150
RCP0603
0603
1.5
3.9
P xR
10 to 2K
1, 2, 5
150
RCP1206
1206
2.4
11
P xR
10 to 2K
1, 2, 5
150
RCP2512
2512
3.5
22
P xR
10 to 2K
1, 2, 5
150
Notes
• Consult factory for availability of additional case sizes.
(1) _{The power rating depends on the maximum temperature of the resistive element. The temperature of the resistive element and adjacent}
materials will rise due to the power dissipation of the resistor. The majority of this heat/energy is dissipated by conduction through the
substrate, terminations, solder joints, and printed circuit board. The maximum power rating in a particular application only applies if the
temperature of the resistive element is maintained at or below 155 °C.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RCP1206W100RGWB (preferred part numbering format)
R C P 1 2 0 6 W 1 0 0 R GWB
GLOBAL
MODEL
RCP0505
RCP0603
RCP1206
RCP2512
BOTTOM TERM.
W = wide
B = traditional
RESISTANCE
VALUE
R=
K = k
10R0 = 10 
1K30 = 1.3 k
TOLERANCE
CODE
F=±1%
G=±2%
J=±5%
PACKAGING CODE
SPECIAL
TP = tin / lead, T/R (full reel)
S3 = tin / lead, T/R (1000 pieces)
WB = tin / lead, tray
S2 = tin / lead, T/R (500 pieces)
S6 = tin / lead, T/R (300 pieces)
EA = lead (Pb)-free, T/R (full reel)
EB = lead (Pb)-free, T/R (1000 pieces)
ET = lead (Pb)-free, tray
EC = lead (Pb)-free, T/R (500 pieces)
ED = lead (Pb)-free, T/R (300 pieces)
blank = standard
(dash number)
(up to 3 digits)
from 1 to 999 as
applicable
Note
• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543).
Revision: 13-Dec-16
1
Document Number: 31098
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000