RCL1225 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Long Side Termination Thick Film Chip Resistors

www.vishay.com
RCL e3
Vishay Draloric
Long Side Termination Thick Film Chip Resistors
FEATURES
• Enhanced power rating
• Long side terminations
• Enhanced thermo cycling performance in 0406
size
• Pure tin solder contacts on Ni barrier layer,
provides compatibility with lead (Pb)-free and lead
containing soldering processes
• AEC-Q200 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER
RATING
P₇₀
W
LIMITING
ELEMENT
VOLTAGE
U_max.
AC_RMS/DC
V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE

SERIES
0406
RR 1016M 0.25
50
RCL0406 e3
± 100
± 200
±1
E24; E96
1R0 to 1M
±5
E24
RCL0612 e3
Zero-Ohm-Resistor: R_max. = 10 m, I_max. at 70°C = 4.0 A
0612
RR 1632M
0.5
75
± 100
± 200
±1
E24; E96
1R0 to 1M
±5
E24
RCL1218 e3
Zero-Ohm-Resistor: R_max. = 10 m, I_max. at 70°C = 6.0 A
1218
RR 3246M
1.0
200
± 100
± 200
±1
E24; E96
1R0 to 2.2M
±5
E24
RCL1225 e3
Zero-Ohm-Resistor: R_max. = 20 m, I_max. at 70°C = 7.0 A
1225
RR 3263M 2.0 ⁽¹⁾
200
± 100
± 200
±1
E24; E96
1R0 to 1M
±5
E24
Zero-Ohm-Resistor: R_max. = 10 m, I_max. at 70°C = 12 A
Notes
• These resistors do not feature a lifetime limitation when operated within the limits of rated dissipation, permissible operating voltage and
permissible film temperature. However, the resistance typically increases due to the resistor’s film temperature over operating time, generally
known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional lifetime.
• Marking and packaging: See datasheet “Surface Mount Resistor Marking” (www.vishay.com/doc?20020). No marking for 0406 size.
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
(1) _{Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance.}
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation at P₇₀ ⁽²⁾
Operating Voltage U_max. AC_RMS/DC
Insulation Voltage U_ins (1 min)
Insulation Resistance
UNIT
W
V
V

RCL0406
0.25
50
100
RCL0612
0.5
75
100
> 10⁹
RCL1218
1.0
200
300
RCL1225
2.0 ⁽³⁾
200
300
Operating Temperature Range
°C
- 55 to + 155
Weight
mg
3.5
11
29.5
55
Notes
(2) _{The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
(3) _{Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance.}
Revision: 15-Apr-13
1
Document Number: 20046
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000