RCKHR02 Datasheet, PDF (1/4 Pages) Vishay Siliconix – High Precision Bulk Metal® Foil with Tolerance of ± 0.005 % and Qualified to ESA Specification 4001/011

RCK HR 02, 02A
Vishay Foil Resistors
High Precision Bulk Metal^® Foil with Tolerance of ± 0.005 %
and Qualified to ESA Specification 4001/011
Due to the unique performance of the Bulk Metal^® foil
resistive elements, these resistors are very well adapted to
high reliability applications.
Our application engineering department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
DIMENSIONS in millimeters
A
B
H
ØD
Measurement
point
F
G
E
C
J
K
FEATURES
• Temperature coefficient of resistance (TCR):
± 5 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.)
• Rated power: to 0.5 W at + 70 °C
• Tolerance: ± 0.005 %
• Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated power
• Resistance range: 33 Ω to 100 kΩ
• Vishay Foil resistors are not restricted to standard values, we
can supply specific “as required” values at no extra cost or
delivery (e.g. 100K1234 vs 100K)
• Electrostatic discharge up to 25 kV
• Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Low inductance: < 0.08 µH typical
• Non hot spot design
• Terminal finishes available: tin/lead alloy
• Matched sets are available per request
(TCR Tracking: to 0.5 ppm/°C)
• For better TCR and PCR performances please review the
RNC90Z and Z555 datasheets
Four variants are available, two reliability levels are proposed:
• Level B: part individualization and test measurements
provided
• Level C: not part individualization and no test measurements
provided
• ESA/SCC 4001
• Lot acceptance test level 3 (LAT3): 10 additional parts needed
• Lot acceptance test level 2 (LAT2): 25 additional parts needed
• Lot acceptance test level 1 (LAT1): 31 additional parts needed
SERIES
DIM.
A
B
C
ØD
E
F
G
H
J
K
RCK HR 02
VARIANTS
DIM. IN mm
MIN.
MAX.
-
-
7.5
-
-
8
-
-
7.5
03 - 04 - 07 - 08
0.55
0.65
-
-
2.5
03 - 07
4.8
5.35
04 - 08
3.55
4.1
03 - 07
1
1.5
04 - 08
1.6
2.1
-
4
6
03 - 04
6
-
07 - 08
20
-
-
-
1.5
Document Number: 63132
Revision: 17-Nov-08
For any questions, contact: [e-mail]
www.vishay.com
1