|
QUAD-HIFREQ Datasheet, PDF (1/14 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Capacitors for RF Power Applications | |||
|
www.vishay.com
QUAD HIFREQ Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Capacitors
for RF Power Applications
ELECTRICAL SPECIFICATIONS
Note
⢠Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature:ï
full range: -55 °C to +125 °C
Extended Temperature (up to 500 VDC):ï
0505: -55 °C to 200 °C from 0.1 pF to 75 pFï
1111: -55 °C to 200 °C from 0.2 pF to 200 pF
Capacitance Range:ï
0505: 0.1 pF to 100 pFï
1111: 0.2 pF to 1000 pFï
2525: 1.0 pF to 2700 pFï
3838: 1.0 pF to 5100 pF
Voltage Rating:ï
0505: 200 VDC to 250 VDCï
1111: 300 VDC to 1500 VDCï
2525: 300 VDC to 3600 VDCï
3838: 500 VDC to 7200 VDC
Temperature Coefficient of Capacitance (TCC):
C0G (D): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with
zero (0) VDC applied
FEATURES
⢠Case size 0505, 1111, 2525, and 3838
⢠Ultra-stable, high Q dielectric material
Available
⢠Lead (Pb)-free terminations code âXâ
Available
⢠Tin / lead termination code âLâ
⢠Non-magnetic copper termination code âCâ
⢠Reliable Noble Metal Electrode (NME) system
Available
⢠High frequency
⢠Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Noteï
* This datasheet provides information about parts that areï
RoHS-compliant and / or parts that are non RoHS-compliant. Forï
example, parts with lead (Pb) terminations are not RoHS-compliant.ï
Please see the information / tables in this datasheet for details
APPLICATIONS
⢠MRI coils and generators
⢠RF instruments
⢠Lasers, CATV, UHF / microwave RF power amplifiers
⢠Filter networks, timing circuits
⢠Mixers, oscillators impedance matching networks
Dissipation Factor (DF):
C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHzï
for values ï£ 1000 pF
C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHzï
for values > 1000 pF
Aging Rate: 0 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 Mï minimum or
1000 ïF, whichever is less
at +125 °C and rated voltage 10 000 Mï minimum or
100 ïF, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages:ï
ï£ 250 VDC-rated: min. 250 % of rated voltageï
300 VDC-rated: min. 150 % of rated voltageï
630 VDC- to 1000 VDC-rated: 150 % of rated voltageï
1500 VDC and up: 120 % rated voltage
Revision: 07-Mar-17
1
Document Number: 45221
For technical questions, contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |