|
PTCCL05H131EBE Datasheet, PDF (1/6 Pages) Vishay Siliconix – 30 V to 60 V PTC Thermistors For Overload Protection | |||
|
2381 66. 5...1/PTCCL..H....BE
Vishay BCcomponents
30 V to 60 V PTC Thermistors
For Overload Protection
FEATURES
⢠Wide range of trip and non-trip currents:
From 94 mA up to 2 A for the trip current
⢠Small ratio between trip and non-trip currents
(It/Int = 1.5 at 25 °C)
⢠High maximum overload current (up to 23 A)
⢠Leaded parts withstand mechanical stresses
and vibration
⢠UL file E148885 according to XGPU standard UL1434
⢠UL approved PTCs are guaranteed to withstand severe
test programs
⢠Long-life cycle tests (over 5000 trip cycles)
⢠Long-life storage tests (3000 h at 250 °C)
⢠Electrical cycle tests at low ambient temperatures
(- 40 °C or 0 °C)
⢠Damp-heat and water immersion tests
⢠Overvoltage tests at up to 200 % of rated voltage
⢠Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
APPLICATIONS
Over-temperature/over-load protection:
⢠Telecommunications
⢠Automotive systems
⢠Industrial electronics
⢠Consumer electronics
⢠Electronic data processing
Maximum voltage (DC or AC)
30 to 60
V
Holding current
0.094 to 2
A
Resistance at 25 °C (R25)
0.3 to 50
Ω
Imax.
0.8 to 23
A
DESCRIPTION
These directly heated thermistors have a positive
temperature coefficient and are primarily intended for
overload protection. They consist of a naked disk with two
tinned brass or copper clad steel leads and are coated with
a high temperature silicone UL 94 V-0 coating. Leadless
disks and leaded disks without coating are available on
request.
Switch temperature
140
°C
Operating temperature range
at max. voltage
- 40 to + 85
°C
Climatic category
40/125/56
MOUNTING
The PTC Thermistors are suitable for processing on
automatic insertion equipment.
Typical soldering
235 °C; duration: 5 s (Pb-bearing)
245 °C, duration: 5 s (Lead (Pb)-free)
Resistance to soldering heat
260 °C, duration: 10 s max.
MARKING
Only the grey lacquered thermistors with a diameter of
8.5 mm to 20.5 mm are marked with BC, R25 value (example
1R9) on one side and Int, Vmax. on the other side.
Document Number: 29085
Revision: 29-Jul-09
For technical questions, contact: nlr@vishay.com
www.vishay.com
15
|
▷ |