PD-04A200 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Plasma Panel Displays 4 Character, 16 Segment Alphanumeric Display with 2.00" [50.80mm] High Characters

PD-04A200
Vishay Dale
Plasma Panel Displays
4 Character, 16 Segment Alphanumeric Display
with 2.00" [50.80mm] High Characters
FEATURES
• 200 foot lamberts brightness
• Designed for multiplexed operation
• Edgeboard connection (terminals available as
PD-04A200-2)
• End stackable
SEGMENT DESIGNATION
AB
H ^IJ
PK
C
G O LD
NM
FE
STANDARD ELECTRICAL SPECIFICATIONS
CHARACTERISTIC @ + 25°C
MINIMUM TYPICAL MAXIMUM
Panel Voltage Drop
(at typical cathode current)
130 VDC 145 VDC 170 VDC
Initial Ionization Time
(peak cathode voltage - 180)
—
Cathode Segment Current
(see drawing for cathode designation)
Segments a, b, p, l, f and e
2.5 mA
Segments c, d, g, h, i, j, k, m, n and o 5.0 mA
Keep Alive †
25 µA
Source Voltage *
- 180 VDC
Anode Off Voltage *
- 35 VDC
Cathode Off Voltage *
- 35 VDC
Digit Period
80 µsec.
Cathode Blanking Interval
20 µsec.
Cathode Blanking Overlap
10 µsec.
Display Scan Period
.32 msec.
Number of Anodes per Scan
—
—
4.3 mA
8.6 mA
50 µA
- 200 VDC
- 100 VDC
- 100 VDC
1250 µsec.
100 µsec.
50 µsec.
5 msec.
4
5 sec.
8.7 mA
17.5 mA
75 µA
- 220 VDC
- 120 VDC
- 120 VDC
2500 µsec.
—
—
10 msec.
—
NOTES
Note: At the specified current, a segment shall glow
uniformly over its entire surface with no glow visible on any
other part of the panel.
† Recommended D.C. keep alive circuit: Use a 1 Megohm
resistor in series with cathode and a 1 Megohm resistor in
series with anode connected to a 200 VDC source.
* Voltage referenced to anode on voltage.
Note: Operating limits do not apply simultaneously, e. g.,
operation at maximum current may require a longer blanking
interval than the minimum specified.
DIMENSIONS in inches [millimeters]
.750
[19.05]
Typ.
1.00
[25.40]
Typ.
.300 ± .150
[7.62 ± 3.81]
.294
[7.468]
Max.
.550
[13.97]
Max.
Digit #1
See Detail
2.00
[50.8]
Typ.
2.85 ± .040
[72.39 ± 1.02]
1.550 ± .062
[39.37 ± 1.575]
.500
[12.70]
Max.
Pad #1
See Table
56 Spaces @ .100 [2.54]
= 5.60 [142.24]
Tolerance
Non-Accumulative
.06 ± .005
[1.52 ± .127] TYP.
7.20 ± .040
[182.88 ± 1.02]
3.600 ± .062
[91.44 ± 1.575]
.540 ± .015
[13.716 ± .381]
.925 ± .015
[23.495 ± .381]
.160 ± .015
[4.064 ± .381]
.120 + .010
- .005
[3.048 + .254
- .127]
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Display with Edgeboard Type Connection ............................................................................................................................ PD-04A200
Display with Attached Terminals (Solderable) .................................................................................................................... PD-04A200-2
www.vishay.com
2
Document Number: 37030
Revision 09-Nov-00