PCAN Datasheet, PDF (1/5 Pages) Vishay Siliconix – High Power Aluminum Nitride, Wraparound Surface Mount,Precision Thin Film Chip Resistor (up to 6 W)

www.vishay.com
PCAN
Vishay Dale Thin Film
High Power Aluminum Nitride, Wraparound Surface Mount,
Precision Thin Film Chip Resistor (up to 6 W)
PCAN series chip resistors are designed on aluminum
nitride ceramic substrates with enlarged backside
terminations to reduce the thermal resistance between the
topside resistor layer and the solder joint on the end users
circuit assembly.
Actual power handling capability is limited by the end user
mounting process. As with any high power chip resistor the
ability to remove the heat is critical to the overall
performance of the device.
FEATURES
• High thermal conductivity aluminum nitride substrate
• Power rating up to 6.0 W
• Resistance range 30  to 175 
• Resistor tolerance to ± 0.1 %
• TCR to ± 25 ppm/°C
• Flame resistant UL 94 V-0
APPLICATIONS
• Power supplies
• Power switching
• Braking system
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Nichrome
Resistance Range
30  to 175 
TCR: Absolute
25 ppm/°C (standard) and 100 ppm/°C
Tolerance: Absolute
Power Rating: Resistor
0.1 %, 0.25 %, 0.5 %, 1.0 % and 5.0 %
2.0 W to 6.0 W ⁽¹⁾
Stability: Absolute
R 1.0 %
Voltage Coefficient
< 0.1 ppm/V
Working Voltage
75 V to 200 V
Operating Temperature Range
-55 °C to +155 °C
Storage Temperature Range
-55 °C to +155 °C
Noise
< -30 dB
Shelf Life Stability: Absolute
± 0.01 %
Note
(1) _{Dependant on component mounting by user.}
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
1206
2000 ⁽²⁾
2512
6000 ⁽²⁾
Notes
• 0603 and 0805 case size under engineering qualification.
(2) _{Dependant on component mounting by user.}
WORKING VOLTAGE (V)
200
200
CONDITIONS
-
-
-
-55 °C to +150 °C
Maximum at +70 °C
1000 h at +70 °C
-
-
-
-
-
1 year at +25 °C
RESISTANCE RANGE ()
30 to 175
30 to 175
Revision: 07-Aug-14
1
Document Number: 60125
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000