|
PATT Datasheet, PDF (1/4 Pages) Vishay Siliconix – Precision Automotive High Temperature Thin Film Chip Resistor, AEC-Q200 Qualified | |||
|
www.vishay.com
PATT
Vishay Dale Thin Film
Precision Automotive High Temperature (155 °C at full
rated power) Thin Film Chip Resistor, AEC-Q200 Qualified
The terminations consist of an adhesion layer, a leach
resistant nickel barrier and gold plating compatible with high
temperature solder systems.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
Gold
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
FEATURES
⢠Resistance range: 2.75 ï to 120 kï
⢠AEC-Q200 qualified, table 7F
⢠AEC-Q200 qualified, ESD rated class 1C (2 kV)
⢠Laser trimmed to any value
⢠Intrinsic moisture protected resistor element
⢠Moisture resistant to MIL-STD-202, method 106
⢠Tantalum nitride resistor film on alumina
substrate
⢠100 % visual inspected per MIL-PRF-55342
⢠Laser-trimmed tolerances to ± 0.1 %
⢠Load life stability 0.2 % at 1000 h at 155 °C and 100 %
rated power
⢠Very low noise and voltage coefficientï
(< - 30 dB, < 0.1 ppm/V)
⢠Sulfur resistant (per ASTM B809-95 humid vapor test)
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Tantalum nitride
Resistance Range
2.75 ï to 120 kï
TCR: Absolute
± 25 ppm/°C to ± 100 ppm/°C
Tolerance: Absolute
± 0.1 % to ± 1.0 %
Stability: Absolute
± 0.05 %
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range (1)
Noise
Shelf Life Stability: Absolute
Note
(1) Storage temperature rating is for device only.
Not applicable
Less than 0.1 ppm/V
75 V
- 55 °C to + 250 °C
- 55 °C to + 250 °C
< - 30 dB
100 ppm
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
0603
150
WORKING VOLTAGE (V)
75
CONDITIONS
-
-
- 55 °C to + 175 °C
+ 25 °C
0.2 % at 1000 h at 155 °C
and 100 % rated power
-
-
-
-
-
-
1 year at 25 °C
RESISTANCE RANGE (ï)
2.75 to 120K
Revision: 17-Sep-13
1
Document Number: 60124
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |