P6KE30CA-E3 Datasheet, PDF (1/6 Pages) Vishay Siliconix – TRANSZORB Transient Voltage Suppressors

www.vishay.com
P6KE6.8A thru P6KE540A
Vishay General Semiconductor
TRANSZORB^® Transient Voltage Suppressors
DO-204AC (DO-15)
PRIMARY CHARACTERISTICS
V_WM
V_BR uni-directional
V_BR bi-directional
P_PPM
P_D
I_FSM (uni-directional only)
T_J max.
Polarity
5.8 V to 459 V
6.8 V to 540 V
6.8 V to 440 V
600 W
5.0 W
100 A
175 °C
Uni-directional, bi-directional
Package
DO-204AC (DO-15)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use CA suffix (e.g. P6KE440CA).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: DO-204AC, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Note
• P6KE250A to P6KE540A and P6KE250CA to P6KE440CA for
commercial grade only
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾ (fig. 1)
Peak pulse current with a 10/1000 μs waveform ⁽¹⁾
P_PPM
I_PPM
600
See next table
Power dissipation on infinite heatsink at T_L = 75 °C (fig. 5)
P_D
Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾
I_FSM
Maximum instantaneous forward voltage at 50 A for uni-directional only ⁽³⁾
V_F
5.0
100
3.5/5.0
Operating junction and storage temperature range
T_J, T_STG
- 55 to + 175
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum}
(3) _{VF = 3.5 V for P6KE220A and below; VF = 5.0 V for P6KE250A and above}
UNIT
W
A
W
A
V
°C
Revision: 18-Sep-12
1
Document Number: 88369
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000