P6KE22A-E3 Datasheet, PDF (1/16 Pages) Vishay Siliconix – TRANSZORB Transient Voltage Suppressors

P6KE6.8 thru P6KE540A
Vishay General Semiconductor
TRANSZORB^® Transient Voltage Suppressors
DO-204AC (DO-15)
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
V_BR uni-directional
V_BR bi-directional
P_PPM
P_D
I_FSM (uni-directional only)
T_J max.
6.8 V to 540 V
6.8 V to 440 V
600 W
5.0 W
100 A
175 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C or CA suffix
(e.g. P6KE440CA).
Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-204AC, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Note:
• P6KE250 ~ P6KE540A and P6KE250C ~ P6KE440CA for
commercial grade only
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak power dissipation with a 10/1000 µs waveform ⁽¹⁾ (Fig. 1)
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾
P_PPM
I_PPM
600
See next table
Power dissipation on infinite heatsink at T_L = 75 °C (Fig. 5)
Peak forward surge current, 8.3 ms single half sine-wave ⁽²⁾
Maximum instantaneous forward voltage at 50 A for uni-directional only ⁽³⁾
P_D
I_FSM
V_F
5.0
100
3.5/5.0
Operating junction and storage temperature range
T_J, T_STG
- 55 to + 175
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 per minute maximum
(3) V_F = 3.5 V for P6KE220(A) and below; V_F = 5.0 V for P6KE250(A) and above
UNIT
W
A
W
A
V
°C
Document Number: 88369 For technical questions within your region, please contact one of the following:
Revision: 22-Oct-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1