P4KE6.8 Datasheet, PDF (1/6 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPERESSOR

P4KE6.8 thru P4KE540A
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
DO-204AL (DO-41)
PRIMARY CHARACTERISTICS
V_BR uni-directional
V_BR bi-directional
P_PPM
P_D
I_FSM (uni-directional only)
T_J max.
6.8 V to 540 V
6.8 V to 440 V
400 W
1.5 W
40 A
175 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-direction use C or CA suffix (e.g. P4KE440CA).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-204AL, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Note: P4KE250 ~ P4KE540A and P4KE250C ~ P4KE440CA for
commercial grade only
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak power dissipation with a 10/1000 µs waveform ⁽¹⁾ (Fig. 1)
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾
Power dissipation on infinite heatsink at T_L = 75 °C (Fig. 5)
Peak forward surge current, 8.3 ms single half sine-wave uni-directional only ⁽²⁾
Maximum instantaneous forward voltage at 25 A for uni-directional only ⁽³⁾
Operating junction and storage temperature range
Notes:
SYMBOL
P_PPM
I_PPM
P_D
I_FSM
V_F
T_J, T_STG
LIMIT
400
See next table
1.5
40
3.5/5.0
- 55 to + 175
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) V_F = 3.5 V for P4KE220(A) and below; V_F = 5.0 V for P4KE250(A) and above
UNIT
W
A
W
A
V
°C
Document Number: 88365 For technical questions within your region, please contact one of the following:
Revision: 22-Oct-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1