NTCS0805E3-T Datasheet, PDF (1/8 Pages) Vishay Siliconix – SMD 0805, Glass Protected NTC Thermistors

www.vishay.com
NTCS0805E3.....T
Vishay BCcomponents
SMD 0805, Glass Protected NTC Thermistors
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
2.2K to 680K

Tolerance on R₂₅-value
B_25/85-value
Tolerance on B_25/85-value
Maximum dissipation at 25 °C
± 1; ± 2; ± 3; ± 5 %
3430 to 4125
K
± 1; ± 3
%
210
mW
Thermal time constant 
 10
s
Dissipation factor D
3.5
mW/K
Operating temperature range
at zero power
- 40 to + 150
°C
Weight
 0.008
g
FEATURES
• TCR ranging from - 6 %/K at - 40 °C to
- 2 %/K at 150 °C
• Tolerance on R₂₅ down to 1 %, and on B_25/85
down to 1 %
• Suitable for wave or reflow soldering
• NiSn terminations
• Fully glass coated and protected
• cUL recognized for safety applications
(file E148885)
• AEC-Q200 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Temperature sensing, protection and compensation in
automotive, industrial, telecom and consumer
applications. Examples are:
- Battery chargers
- Power suppliers
- Office equipment
- LCD compensation
- In-car entertainment
DESCRIPTION
Size 0805 chip thermistors with a negative temperature
coefficient. The device has no marking.
PACKAGING
Available in 8 mm punched paper tape on reel package of
4000 units.
DESIGN-IN SUPPORT
For complete Curve Computation, visit:
www.vishay.com/resistors-non-linear/curve-computation-list/
ELECTRICAL DATA AND ORDERING INFORMATION
R₂₅-VALUE
(k)
B_25/85-VALUE
(K)
TOLERANCE ON B_25/85
(%)
SAP MATERIAL AND
ORDERING NUMBER
NTCS0805E3... ⁽¹⁾
2.2
3600
±1
222*MT
4.7
3500
±1
472*MT
10
3430
±3
103*LT
10
3570
±3
103*MT
10
3940
±1
103*HT
15
3700
±1
153*MT
22
3800
±1
223*HT
33
3920
±1
333*HT
47
3960
±1
473*HT
68
4100
±1
683*XT
100
3590
±1
104*MT
100
4100
±1
104*XT
330
3930
±1
334*HT
470
4025
±1
474*XT
680
4125
±1
684*XT
Notes
(1) _{Replace * in SAP by J for 5 %, H for 3 %, G for 2 %, F for 1 % tolerance on R25}
(2) _{Replace * in 12NC by 3 for 5 %, 6 for 3 %, 4 for 2 %, 5 for 1 % tolerance on R25}
12NC OLD MATERIAL NUMBER
2381 615 5... ⁽²⁾
*222
*472
-
*103
-
*153
*223
*333
*473
*683
-
*104
*334
*474
*684
Revision: 08-Aug-12
1
Document Number: 29044
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000