NTCS0603E3683FHT Datasheet, PDF (1/6 Pages) Vishay Siliconix – SMD 0603, Glass Protected NTC Thermistors

www.vishay.com
NTCS0603E3.....T
Vishay BCcomponents
SMD 0603, Glass Protected NTC Thermistors
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
2.0K to 100K

Tolerance on R₂₅-value
B_25/85-value
Tolerance on B_25/85-value
Maximum dissipation at 25 °C
± 1; ± 2; ± 3; ± 5 %
3420 to 4100
K
±1
%
125
mW
Thermal time constant 
8
s
Dissipation factor D
3.0
mW/K
Operating temperature range
at zero power
- 40 to + 150
°C
Weight
 0.006
g
FEATURES
• TCR ranging from - 7 %/K at - 40 °C to - 2 %/K
at 150 °C
• Tolerance on R₂₅ down to 1 %, and on B_25/85
down to 1 %
• Suitable for wave or reflow soldering
• NiSn terminations
• Fully glass coated and protected
• cUL recognized for safety applications
(file E148885)
• AEC-Q200 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Temperature sensing, protection and compensation in
automotive, industrial, telecom and consumer
applications. Examples are:
- Battery chargers
- Power suppliers
- Office equipment
- LCD compensation
- In-car entertainment
DESCRIPTION
Size 0603 chip thermistors with a negative temperature
coefficient. The device has no marking.
PACKAGING
Available in 8 mm punched paper tape on reel package of
4000 units.
DESIGN-IN SUPPORT
For complete Curve Computation, visit:
www.vishay.com/resistors-non-linear/curve-computation-list/
ELECTRICAL DATA AND ORDERING INFORMATION
R₂₅-VALUE
(k)
2.0
2.2
2.7
4.7
10
10
10
15
22
33
47
68
100
B_25/85-VALUE
(K)
3420
3520
3600
3830
3435
3610
3960
3600
3730
3860
3960
3985
4100
TOLERANCE ON B_25/85
(%)
±1
±1
±1
±1
±1
±1
±1
±1
±1
±1
±1
±1
±1
SAP MATERIAL AND ORDERING NUMBER ⁽¹⁾
NTCS0603E3202*LT ⁽²⁾
NTCS0603E3222*MT
NTCS0603E3272*MT
NTCS0603E3472*HT
NTCS0603E3103*LT
NTCS0603E3103*MT
NTCS0603E3103*HT
NTCS0603E3153*MT ⁽³⁾
NTCS0603E3223*MT
NTCS0603E3333*HT
NTCS0603E3473*HT
NTCS0603E3683*HT
NTCS0603E3104*XT
Notes
(1) _{Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % tolerance on R25}
(2) _{Type NTCS0603E3202*LT only available in 5 % tolerance on R25}
(3) _{Type NTCS0603E3153*MT is not UL recognized}
Revision: 25-Feb-13
1
Document Number: 29056
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000