NTCASRFE3C90406 Datasheet, PDF (1/3 Pages) Vishay Siliconix – NTC Thermistors, Ice Cube Sensors

NTCASRFE3C90406 Ice Cube Sensor
Vishay BCcomponents
NTC Thermistors, Ice Cube Sensors
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C ⁽¹⁾
Tolerance on R₂₅-value
B_25/85-value ⁽¹⁾
Tolerance on B_25/85-value
Operating temperature range
at zero power
Resistance value at 0 °C
VALUE
9.965K
± 1.92
3984
± 0.5
- 55 to + 50
32.51K
UNIT

%
K
%
°C

Min. dielectric withstanding
voltage (immersed in water)
3750
V_AC
Maximum power dissipation
at 25 °C
150
mW
Climatic category
(LCT/UCT/days)
55/50/56
Weight
10
g
Note
(1) _{Other resistance, tolerance and B-value available on request}
ORDERING INFORMATION
SAP MATERIAL AND
ORDERING NUMBER
DESCRIPTION
NTCASRFE3C90406
NTC ice cube 10K 380 mm
DIMENSIONS in millimeters
L7
L6
L5
(1)
(3)
(2)
ØD
L4
L1
FEATURES
• Key component for temperature sensing and
electronic control
• Accurate Vishay NTC chips, enabling class A to
class A+++ refrigerator grades
• Sensor design following class II insulation
(principal + supplementary insulation for the
sensor head)
• High adhesive strength between silicone cable
and encapsulating lacquer
• Specifically developed design allows for a very good
water, moisture and ice resistance (min. 1000 h water
immersion)
• Suitable for evaporator temperature measurement. Very
high number of thermal cycles resistant (min.
100 000 cycles)
• The cables jackets are suitable for back-panel
polyurethane foaming process (max. 100 °C, 5 min)
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Surface temperature sensors
• The housing and cable are cold flexible at - 60 °C
• The housing plastic is FDA grade
APPLICATIONS
Temperature measurement, sensing and control:
• Ice cube makers
• White goods
• Refrigerators
• Freezers, deep-freezers
• Counter drinks coolers
• Backbar and catering coolers
• Display fridges
• Wine coolers
DESIGN-IN SUPPORT
• Other resistance curves and tolerances are available on
request
• Consult Vishay for other lead length, other connector, or
other features
• 3D solid models: www.vishay.com/doc?29106
• NTC curve computation:
www.vishay.com/resistors-non-linear/curve-computation-list/
L1 (mm)
380 mm + 20/- 10
(4)
L2
SPQ
1000 pieces
ØD
4 mm
L2 35 mm ± 10 mm
L4 25 mm ± 0.3 mm
L5 11.5 mm ± 0.2 mm
L6 4.5 mm ± 0.2 mm
L7
8 mm ± 0.2 mm
Document Number: 29122
Revision: 09-May-11
For technical questions, contact: [e-mail]
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000