NTCALUG03_11 Datasheet, PDF (1/7 Pages) Vishay Siliconix – NTC Thermistors, Mini Lug Sensors

NTCALUG03 Mini Lug Series
Vishay BCcomponents
NTC Thermistors, Mini Lug Sensors
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
10K to 47K

Tolerance on R₂₅-value
± 2 to ± 3
%
B_25/85-value
3740 to 3984
K
Tolerance on B_25/85-value
± 0.5 to ± 1.5
%
Operating temperature range:
°C
At zero dissipation
- 40 to + 125
Response time
3.5
s
Thermal time constant 
5
s
Dissipation factor 
10
mW/K
Maximum power dissipation
at 25 °C
100
mW
Min. dielectric withstanding
voltage between terminals
and lug
1000
V_AC
Climatic category
(LCT/UCT/days)
40/125/56
-
Weight
without connector
0.5
g
with connector
0.6
g
Note
• Other R₂₅ values and tolerances available upon request
FEATURES
• Fast time response for surface applications
compared to industry standard NTC lug sensors
• Reduced thermal gradient, due to the use of
small dimensions and nickel conductor,
allowing for an accurate surface temperature
measurement
• The sensor is not suitable for being permanently
in contact with water or liquids
• Small size connector and small lug ring tongue terminal,
allowing for temperature sensing at locations where only
limited space is available
• Connector ZHR-2 (optional)
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
Thermistors used for surface temperature sensing and
control in:
• Computer equipment
• MOSFETS, IC’s, Power Electronics, heatsink temperature
control
• Consumer appliances
• Industrial equipment
• Automotive equipment
DESCRIPTION
Miniature insulated chip thermistor with a negative
temperature coefficient in accordance with IEC 60539. The
device has no marking.
MOUNTING
• The sensor can be mounted by means of a screw. For stud
size, metric 2 mm M2/American stud #1 or #2
• The end wire can be soldered, welded or crimped to a
connector
• Optional connector for Wire-to-Wire or Wire-to-Board
connections
ELECTRICAL DATA AND ORDERING INFORMATION
R₂₅-VALUE R₂₅-TOL. B_25/85-VALUE B_25/85-TOL.
(k)
(%)
(K)
(± %)
SAP MATERIAL
NUMBER
10
±3
3984
0.5
NTCALUG03A103H
10
±3
3984
0.5
NTCALUG03A103HC
10
±2
3984
0.5
NTCALUG03A103G
10
±2
3984
0.5
NTCALUG03A103GC
12
±3
3740
1.5
NTCALUG03A123H
12
±3
3740
1.5
NTCALUG03A123HC
47
±3
3740
1.5
NTCALUG03A473H
47
±3
3740
1.5
NTCALUG03A473HC
Note
• Ordering information can be found on: www.vishay.com/doc?33036
DESCRIPTION
NTC Mini Lug 10K 3 % 3984 K 0.5 %
NTC Mini Lug 10K 3 % 3984 K 0.5 % with connector
NTC Mini Lug 10K 2 % 3984 K 0.5 %
NTC Mini Lug 10K 2 % 3984 K 0.5 % with connector
NTC Mini Lug 12K 3 %
NTC Mini Lug 12K 3 % with connector
NTC Mini Lug 47K 3 %
NTC Mini Lug 47 kΩ 3 % with connector
R/T
TABLE
Table 1
Table 1
Table 2
Table 2
Table 3
Table 3
Table 4
Table 4
Document Number: 29114
Revision: 12-Apr-11
For technical questions, contact: [e-mail]
www.vishay.com
121
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000