|
NTCAIMME3 Datasheet, PDF (1/3 Pages) Vishay Siliconix – NTC Thermistors, Miniature Immersion Sensor | |||
|
www.vishay.com
NTCAIMME3
Vishay BCcomponents
NTC Thermistors, Miniature Immersion Sensor
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
10K
ï
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature rangeï
at zero dissipation
Response time t 63.2 % of ïTï
(air 25°C to water 85°C)
±3
%
3984
K
± 0.5
%
-25 to +105
°C
1.5
s
Dissipation factor ï¤
Mounted in still air
2.8
mW/K
In still water
5.6
Maximum power dissipation at 55 °C
100
mW
Min. dielectric withstanding voltage
between terminals and capsule (10 s)
500
VAC
Insulation resistance at 500 VDC
Thermal gradient
> 100M
ï
< 0.02
K/K
Weight
2.1
g
Note
⢠Other R25 values and tolerances available upon request
Fig. 1 - Mounting example with sealing ring and screw
FEATURES
⢠Fast time response for fluid immersion
applications
⢠Reduced thermal gradient, due to the use of
small tip dimensions and thin insulated wire
⢠Sensor for permanent contact with water or
other liquids
⢠Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
Immersion sensor used for temperature measurement,
sensing and control in:
⢠Water boilers
⢠Heating systems
⢠Chiller systems
⢠Water and used water systems
⢠Water and oil tanks
⢠Consumer appliances, Coffee machines
⢠Industrial appliances
⢠Solar heating systems
DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a
SS304 housing with or without brass collar for sealed
mounting and twin PVC insulated AWG#30 lead wire
connection.
MOUNTING
⢠The sensor can be mounted by means of a sealing O-ring
and screw
⢠The end wire can be soldered, or crimped to a connector
⢠Optional connector for Wire-to-Wire or Wire-to-Board
connections
⢠The contact area with the liquid is preferably min 10 mm
down from the tip and max to the brass collar location (see
Fig. 1 for mounting example)
⢠Not intended for corrosive or high acidic liquids
⢠The epoxy lead-wire side can not be in permanent contact
with liquids, or water
PACKAGING
Available in plastic bags of 250 pieces.
DESIGN-IN SUPPORT
⢠Other resistance curves and tolerances are available on
request
⢠Consult Vishay for other lead length
⢠3D solid models: www.vishay.com/doc?29106
⢠For complete RT curve computation, visit:ï
www.vishay.com/thermistors/ntc-curve-list/
ELECTRICAL DATA AND ORDERING INFORMATION
R25
R25-TOL.
B25/85
B25/85-TOL.
(ï)
(%)
(K)
(± %)
DESCRIPTION
10 000
±3
3984
0.5
NTC Immersion 10K 3 % 3984K 0.5 %
10 000
±3
3984
0.5
NTC 10K 3 % 3984K 0.5 % no ring
SAP MATERIAL AND
ORDERING NUMBER
NTCAIMME3C90373
NTCAIMME3C90686
Revision: 03-Mar-17
1
Document Number: 29131
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |