NSR Datasheet, PDF (1/5 Pages) NIC-Components Corp. – Miniature Aluminum Electrolytic Capacitors

NSR
Vishay Dale
Wirewound Resistors, Noise Suppressor
FEATURES
• Ideal for reducing RFI during electrical
discharges on gasoline engines
• Variety of resistance and inductance values
available
RoHS
COMPLIANT
• Special design of electrical contacts upon request
• Capability to withstand high voltage pulses at high
frequency
TECHNOLOGY
The resistor element is a resistive wire, which is wound in a single layer on a fiberglass core (ceramic core for type 3 shown
below). Metallic caps or electrodes are fixed to the ends of the resistive core, following the specific ignition system
characteristics. A coating protects the resistive element against moisture, mechanical shock and is able to withstand high
temperatures. These products can be moulded with epoxy resin, thermoplastic or thermo set plastic materials.
TYPE 1 (WITH CAPS)
TYPE 2 (WITH ELECTRODES)
TYPE 3 (AXIAL LEAD WIRE TERMINAL)
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Resistance Range ⁽¹⁾
Ω
Tolerances ⁽²⁾
%
Inductance Range, 2 MHz ⁽³⁾
µH
Temperature Coefficient
ppm/°C
Operating Temperature Range
°C
Notes:
(1) _{Special resistance values available upon request}
(2) _{Other tolerances available upon request}
(3) _{Special inductance values available upon request}
NSR CHARACTERISTICS
1K - 15K
± 10 , ± 15, ± 20
5 to 72
± 250
- 40 to + 200
www.vishay.com
182
For technical questions, contact: [e-mail]
Document Number: 30252
Revision: 17-Oct-07