NOMC_08 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Molded, 50 Mil Pitch, Dual-In-Line Resistor Network

NOMC
Vishay Thin Film
Molded, 50 Mil Pitch, Dual-In-Line Resistor Network
Narrow Body
Actual Size
The NOMC series features a standard 14 and 16 pin narrow
body (0.150") small outline surface mount style. It can
accommodate resistor networks to your particular
application requirements. The networks can be constructed
with Passivated Nichrome (standard), or Tantalum Nitride ⁽¹⁾
resistor films to optimize performance.
Note
(1) _{Available upon request. Resistance value range and performance}
differs from Passivated Nichrome standard electrical
specifications on datasheet, consult factory.
SCHEMATICS
NOMC1401 or NOMCT1401
NOMC1601 or NOMCT1601
The 01 circuit provides a choice of 13 or 15 equal value resistors
each connected between a common lead (14 or 16).
Custom schematics available
FEATURES
• Lead (Pb)-free available
• Standard 14 and 16 pin counts
(0.150" Narrow Body) JEDEC MS-012
• Rugged molded case construction
Pb-free
Available
RoHS*
COMPLIANT
• Stable thin film element (500 ppm at + 70 °C at 2000 h)
• Low temperature coefficient (± 25 ppm/°C)
TYPICAL PERFORMANCE
TCR
TOL
ABS
25
ABS
0.10
TRACKING
5
RATIO
0.05
STANDARD RESISTANCE OFFERING
(Equal Value Resistors)
ISOLATED (03) SCHEMATIC BUSSED (01) SCHEMATIC
1 kΩ
10 kΩ
2 kΩ
20 kΩ
5 kΩ
10 kΩ
20 kΩ
100 kΩ
Consult factory for additional values
NOMC1403 or NOMCT1403
NOMC1603 or NOMCT1603
The 03 circuit provides a choice of 7 or 8 equal value resistors
each connected between a common lead (14 or 16).
Custom schematics available
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Pin Number
14, 16
Bussed (01) Schematic
Resistance Range
Isolated (03) Schematic
100 Ω to 50 kΩ each resistor
100 Ω to 100 kΩ each resistor
TCR
Tracking
Absolute
± 5 ppm/°C typical
± 25 ppm/°C standard
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
24
For technical questions, contact: [e-mail]
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
Document Number: 60007
Revision: 02-Oct-08