NOMCA Datasheet, PDF (1/5 Pages) Vishay Siliconix – Rugged molded case construction

www.vishay.com
NOMCA
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Precision Automotive, AEC-Q200 Qualified, Networks
The NOMCA series features a standard 14 pin or 16 pin
narrow body (0.150") small outline SMT package. The
network is constructed with tantalum nitride resistor film on
high purity alumina substrate for improved ESD and
moisture protection. Custom schematics are available
consult factory.
FEATURES
• Standard 14 pins and 16 pins counts
(0.150" narrow body) JEDEC MS-012
variation AB and AC
• Rugged molded case construction
• Excellent long term ratio stability
(R ± 0.015 %)
• Low TCR tracking ± 5 ppm/°C
• AEC-Q200 ESD rated 1 kV (< 10 k)
• AEC-Q200 ESD rated 2 kV (>10 k)
• Compliant to RoHS Directive 2011/65/EU
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
25
ABSOLUTE
0.10
TRACKING
5
RATIO
0.05
SCHEMATICS
1403
1603
The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom
schematics available.
STANDARD RESISTANCE OFFERING (Equal Value Resistors)
ISOLATED (03) SCHEMATIC
1 k
2 k
5 k
10 k
20 k
50 k
Note
• Consult factory for additional values
Revision: 24-Feb-12
1
Document Number: 60117
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000