MSP50A Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount TRANSZORB Transient Voltage Suppressors

New Product
MSP5.0A
Vishay General Semiconductor
Surface Mount TRANSZORB^® Transient Voltage Suppressors
eSMP ^TM Series
Top View
Bottom View
MicroSMP
PRIMARY CHARACTERISTICS
V_WM
P_PPM
I_FSM
T_J max.
5.0 V
100 W
25 A
150 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
specifically for protecting 5.0 V supplied sensitive
equipment against transient overvoltages.
FEATURES
• Very low profile - typical height of 0.65 mm
• Ideal for automated placement
• Oxide planar chip junction
• Uni-directional polarity only
• Peak pulse power: 100 W (10/1000 µs)
• ESD capability: 15 kV (air), 8 kV (contact)
• Meets MSL level 1, per J-STD-020C, LF maximum
peak of 260 °C
• Solder dip 265 °C max. 10 s, per JESD 22-A111
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21
definition
• Find out more about Vishay’s Automotive Grade
Product requirements at:
www.vishay.com/applications
MECHANICAL DATA
Case: MicroSMP
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-M3 - halogen-free and RoHS compliant,
commercial grade
Base P/NHM3 - halogen-free and RoHS compliant,
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3
suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation ⁽¹⁾⁽²⁾
Peak pulse current with a 10/1000 µs waveform (fig. 1)
Non repetitive peak forward surge current 10 ms single half sine-wave ⁽²⁾
Power dissipation T_L = 120 °C ⁽²⁾
Operating junction and storage temperature range
Notes
(1) _{Non-repetitive current pulse, per fig. 1}
(2) _{Mounted on 6.0 mm x 6.0 mm copper pads to each terminal}
SYMBOL
P_PPM
I_PPM
I_FSM
P_D
T_J, T_STG
VALUE
100
10.9
25
1.0
- 55 to + 150
Document Number: 88487
Revision: 16-Jun-09
For technical questions within your region, please contact one of the following:
[e-mail], [e-mail], [e-mail]
UNIT
W
A
A
W
°C
www.vishay.com
1