MRCN Datasheet, PDF (1/2 Pages) Vishay Siliconix – Resistor/Capacitor Networks, Molded SIP

MRCN
Vishay Techno
Resistor/Capacitor Networks, Molded SIP
ELECTRICAL SPECIFICATIONS - RESISTORS
Resistance Range: 50 ohms to 1 kilohm. Others available.
Resistance Tolerance: ± 2 %, ± 5 % standard.
± 1 % available.
Temperature Coefficient of Resistance: ± 150 ppm/°C.
Operating Temperature Range: - 55 °C to + 125 °C.
Operating Voltage: 50 VDC maximum. Higher voltage
available.
SCHEMATICS
SCHEMATIC 10
C ^RR
RR R R
FEATURES
• Custom schematics available.
• NPO or X7R capacitors for line terminator.
• Wide operating temperature range.
• Molded epoxy case.
• Solder coated copper terminals.
• Solderability per MIL-STD-202 method 208E.
• Marking resistance to solvents per MIL-STD-202 method 215.
ELECTRICAL SPECIFICATIONS - CAPACITORS
Type: NPO or X7R.
NPO Capacitance Range Standard: 33 pF - 3900 pF, other
values available.
X7R Capacitance Range: 470 pF - 0.1 µF, other values
available.
Tolerance: NPO Type = ± 10 %, ± 20 %.
X7R Type = ± 10 %, ± 20 %. Tighter tolerance available.
Consult factory at [phone].
Voltage Rating: 50 VDC. Higher voltage available.
DIMENSIONS in inches [millimeters]
#1 Pin
0.150 ± 0.010
[3.81 ± 0.254]
A
1 23 45 6 7 8
10K ECL terminator network
SCHEMATIC 20
C
C
C
R
R
R
SCHEMATIC 30
1 23 4
n-1 n
C
C
R
R
RR
R
R
B
0.020 ± 0.002
[0.508 ± 0.051]
0.125± 0.015
[3.18 ± 0.381]
C
Pin #1 Identifier
(Seating
Plane)
0.020± 0.002
[0.508± 0.051]
0.100± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
NUMBER
A
B
C
OF PINS ± 0.010 [0.254] ± 0.010 [0.254] ± 0.010 [0.254]
8
0.780 [19.81] 0.345 [8.26]
0.040 [1.02]
1 2 3 4 5 6 7 8 9 10
100K ECL terminator network
NOTE: Custom schematics available.
10
1.040 [26.42] 0.346 [8.79]
0.075 [1.91]
ORDERING INFORMATION
MRCN XX
XX
XXX
MODEL NUMBER SCHEMATIC
OF PINS
RESISTANCE
VALUE (Ohms)
First two digits are
significant, third digit signifies
number of zeros to follow.
*Tighter tolerance available.
X
RESISTANCE
TOLERANCE
F=±1%
G=±2%
J=±5%
XXX
CAPACITANCE
VALUE (pF)
First two digits are significant,
third digit signifies number of
zeros to follow.
X
CAPACITANCE
TOLERANCE*
K = ± 10 %
M = ± 20 %
e3
LEAD
TERMINATION
e3 = SnAg
95/5
Document Number: 68008
Revision: 01-Aug-05
www.vishay.com
1