MODEL708 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 7/8inch (22.2 mm) Single Turn Conductive Plastic Precision Potentiometer

Model 708
Vishay Spectrol
7_{/8" (22.2 mm) Single Turn Conductive Plastic}
Precision Potentiometer
FEATURES
• Virtually infinite resolution
• Bushing mount and servo mount types available
• Rotational life exceeds 20 million shaft
revolutions
RoHS
COMPLIANT
• Co-molded track and multi-finger wiper provide low noise
signal
• Ohmic value range: 500 Ω to 50 kΩ
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range:
Tolerance:
Linearity (Independent)
Electrical Angle
Power Rating
Section 1:
Additional Sections:
Output Smoothness
Insulation Resistance
Dielectric Strength
Taps (Extra)
Phasing
Temperature Coefficient of Resistance
STANDARD
± 10 %
STANDARD
± 0.5 %
500 Ω to 50 kΩ
340° ± 5°
SPECIAL
±5%
SPECIAL
± 0.2 %
1.0 W at 70° ambient derated to zero at 125 °C
75 % of the rating of section 1
0.1 % maximum
1000 MΩ minimum, 500 V_DC
1000 V_RMS, 60 Hz from Terminals to shaft
Extra taps available as special
Points at which output is 0.5 aligned
± 1° (ref. to section 1)
± 400 ppm/°C maximum
ORDERING INFORMATION/DESCRIPTION
The Model 708 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
708
B
1
10K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS TOTAL RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
Up to 6
Beginning with the section nearest the
mounting end
Box of 1 piece
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
708
S
2
MODEL
STYLE
GANGS
B: Bushing
S: Servo
From 1 up to 6
102
OHMIC VALUE GANG N^O 1
1K
103
OHMIC VALUE GANG N^O 2
10K
B01
PACKAGING
Document Number: 57070
Revision: 02-Jul-07
For technical questions, contact: [e-mail]
www.vishay.com
41