MODEL702 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 7/8 (22.2 mm) Single Turn Wirewound Precision Potentiometer

Model 702
Vishay Spectrol
7_{/8" (22.2 mm) Single Turn Wirewound}
Precision Potentiometer
FEATURES
• Large range of ohmic values: from 5 Ω up to
100 kΩ
• Bushing mount or servo mount types are
available
• Extra taps upon request
• Gangable up to 6 sections
RoHS
COMPLIANT
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance:
(Bushing 91 kΩ max.)
Tolerance:
20 Ω and above
Below 20 Ω
Absolute Minimum Resistance
End Voltage
Linearity (Independent)
5 Ω to 100 Ω
100 Ω to 500 Ω
500 Ω to 5 kΩ
5 kΩ and Above
Noise
Electrical Angle
Power Rating
Section 1
Additional Sections
Insulation Resistance
Dielectric Strength
Taps (Extra)
Phasing (CCW End Points)
STANDARD
5 Ω to 20 kΩ
SPECIAL
5 Ω to 100 kΩ
±3%
±5%
±1%
±3%
Linearity x total resistance or 0.5 Ω whichever is greater
Linearity x total applied voltage for total resistance above 20 Ω, 2.0 %
of total applied voltage for 20 Ω and below
STANDARD
± 1.0 %
± 1.0 %
± 0.5 %
± 0.5 %
BEST PRACTICAL
± 0.75 %
± 0.50 %
± 0.35 %
± 0.25 %
100 Ω ENR
350° ± 2°
1.25 W at 70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (0.94 W at 70 °C)
1000 MΩ minimum 500 V_DC
1000 V_RMS, 60 Hz
9 available as special, standard tolerance ± 2°
Additional sections phased to section 1 within ± 1°
ORDERING INFORMATION/DESCRIPTION
The Model 702 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
702
MODEL
B
MOUNTING TYPE
B: Bushing
S: Servo
1
NUMBER OF SECTIONS
From 1 up to 6 sections
(max.)
20K
OHMIC VALUE
BO1
PACKAGING
Box of 1 piece
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
702
S
2
MODEL
MOUNTING
TYPE
NUMBER OF
SECTIONS
S: Servo
050
OHMIC VALUE
Section N^O 1
050 = 5 Ω
100
OHMIC VALUE
Section N^O 2
100 = 10 Ω
B01
PACKAGING
Box of
1 piece
www.vishay.com
112
For technical questions, contact: [e-mail]
Document Number: 57069
Revision: 12-Jul-07