MODEL402 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 3 (76.2 mm) Single Turn Wirewound Precision Potentiometer

Model 402
Vishay Spectrol
Not for New Design
3" (76.2 mm) Single Turn Wirewound
Precision Potentiometer
This Model 402 is only for maintenance purposes. It is not
recommended for new designs and will be obsolete in a near
future.
FEATURES
• Large range of ohmic values: 10 Ω up to 150 kΩ
• Bushing mount, servo mount and screwing
mount available
• Extra taps upon request
• Gangable up to 6 sections
RoHS
COMPLIANT
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance:
Tolerance: 100 Ω and Above
Below 100 Ω:
Absolute Minimum Resistance
End Voltage
Linearity (Independent)
Total Resistance
10 Ω to 200 Ω
200 Ω to 2 kΩ
2 kΩ to 10 kΩ
10 kΩ and Above
Noise
Electrical Angle
Power Rating
Section 1
Additional Section
Insulation Resistance
Dielectric Strength
Taps (Extra)
Phasing (CCW End Points)
STANDARD
10 Ω to 100 kΩ
±3%
±5%
SPECIAL
150 kΩ
±1%
±3%
Linearity x total resistance or 0.5 Ω
whichever is greater
Linearity x total applied voltage for total
resistance above 20 Ω, 2.0 % of total voltage for
20 Ω and below
STANDARD
BEST PRACTICAL
± 0.50 %
± 0.25 %
± 0.25 %
± 0.25 %
100 Ω ENR
350° ± 2°
± 0.25 %
± 0.15 %
± 0.10 %
± 0.075 %
6.0 W at 70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (4.5 W at 70 °C)
1000 MΩ minimum 500 V_DC
1000 V_RMS, 60 Hz
37 available as special, standard tolerance ± 1°
Additional sections phased to section 1 within ± 1°
ORDERING INFORMATION/DESCRIPTION
The Model 402 can be ordered from this specification sheet with a variety of alternate characteristics, are as shown above. For most rapid
service on your order, please state:
402
MODEL
B
MOUNTING TYPE
B: Bushing
S: Servo
C: Screw
1
NUMBER OF SECTIONS
From 1 up to 6 (Max.)
100K
OHMIC VALUE
BO1
PACKAGING
Box of 1 piece
Other characteristics will be standard as decribed on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
402
MODEL
C
MOUNTING
TYPE
C: Screw
2
NUMBER OF
SECTIONS
101
OHMIC VALUE
Section N^O 1
101 = 100 Ω
104
OHMIC VALUE
Section N^O 2
104 = 100 kΩ
B01
PACKAGING
Box of
1 piece
www.vishay.com
106
For technical questions, contact: [e-mail]
Document Number: 57061
Revision: 15-Jun-07