MODEL164 Datasheet, PDF (1/3 Pages) Vishay Siliconix – 1/2 (12.7 mm) Ten Turn Wirewound Servo Mount Precision Potentiometer

Model 164
Vishay Spectrol
1_{/2" (12.7 mm) Ten Turn Wirewound}
Servo Mount Precision Potentiometer
FEATURES
• Large range of ohmic values: 100 Ω to 100 kΩ
• Smallest size available on the market
• Very easy and accurate adjustment
RoHS
COMPLIANT
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
Tolerance
Linearity (Independent)
Noise
Rotation
Power Rating:
Section 1:
Insulation Resistance
Dielectric Strength
Absolute Minimum Resistance
End Voltage
STANDARD
100 Ω to 100 kΩ
±5%
STANDARD
± 0.30 %
100 Ω ENR
3600° + 15° - 0°
SPECIAL
115 kΩ
±1%
BEST PRACTICAL
± 0.15 %
2.0 W at 40 °C ambient, derated to zero at 125 °C
100 MΩ minimum, 500 V_DC
500 V_RMS, 60 Hz
Linearity x total resistance or 0.5 Ω, whichever is greater
Linearity x total applied voltage for total resistance above
20 Ω, 2.0 % of total applied voltage for 20 Ω and below
MATERIAL SPECIFICATIONS
Housing and Lids
Molded, glass filled, thermoset
plastic
Front Lid
Aluminum, anodized
Shaft
Stainless steel, non-passivated
Terminals
Brass, plated for solderability
ENVIRONMENTAL SPECIFICATIONS
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt Spray
48 h
Rotational Life
500 000 shaft revolutions
Temperature Range
- 55 °C to + 125 °C
MARKING
Unit Identification
Units shall be marked with Vishay Spectrol name and model no, resistance and resistance tolerance,
linearity, terminal identification and date code
ORDERING INFORMATION/DESCRIPTION
The Model 164 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
164
S
10K
BO5
e4
MODEL
STYLE
(SERVO)
TOTAL RESISTANCE
PACKAGING
LEAD FINISH
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
164
S
MODEL
STYLE
103
OHMIC VALUE
B05
PACKAGING
www.vishay.com
118
For technical questions, contact: [e-mail]
Document Number: 57095
Revision: 05-Jul-07