MODEL162 Datasheet, PDF (1/3 Pages) Vishay Siliconix – 1/2 (12.7 mm) Ten Turn Wirewound Bushing Mount Precision Potentiometer

Model 162
Vishay Spectrol
1_{/2" (12.7 mm) Ten Turn Wirewound}
Bushing Mount Precision Potentiometer
FEATURES
• Large range of ohmic values: 100 Ω to 100 kΩ
• Smallest size available on the market
• Very easy and accurate adjustment
RoHS
COMPLIANT
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
Tolerance
Linearity (Independent)
Noise
Electrical Angle
Power Rating
Insulation Resistance
Dielectric Strength
Absolute Minimum Resistance
End Voltage
STANDARD
100 Ω to 100 kΩ
±5%
SPECIAL
115 kΩ
±1%
STANDARD
± 0.30 %
BEST PRACTICAL
± 0.15 %
100 Ω ENR
3600° + 15° - 0°
2.0 W at 40 °C ambient, derated to zero at 125 °C
100 MΩ minimum, 500 V_DC
500 V_RMS, 60 Hz
Linearity x total resistance or 0.5 Ω, whichever is greater
Linearity x total applied voltage for total resistance above
20 Ω, 2.0 % of total applied voltage for 20 Ω and below
MATERIAL SPECIFICATIONS
Housing and Lids
Molded, glass filled, thermoset
plastic
Bushing
Brass, nickel plated
Shaft
Stainless steel, non-passivated
Terminals
Brass, plated for solderability
Bushing Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Steel, nickel plated
Brass, nickel plated
MARKING
Unit
Identification
Units shall be marked with Vishay Spectrol
name and model no, resistance and resistance
tolerance, linearity, terminal identification and
date code
ENVIRONMENTAL SPECIFICATIONS
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt Spray
48 h
Rotational Life
500 000 shaft revolutions
Temperature Range
- 55 °C to + 125 °C
ORDERING INFORMATION/DESCRIPTION
The Model 162 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
162
B
10K
BO5
e4
MODEL
STYLE
(BUSHING)
TOTAL RESISTANCE
PACKAGING
LEAD FINISH
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
162
B
MODEL
STYLE
103
OHMIC VALUE
B05
PACKAGING
www.vishay.com
116
For technical questions, contact: [e-mail]
Document Number: 57043
Revision: 18-Jun-07