MODEL159 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 7/8 (22.2 mm) Single Turn Cermet Precision Potentiometer

Model 159
Vishay Spectrol
Not for New Design
7_{/8" (22.2 mm) Single Turn}
Cermet Precision Potentiometer
FEATURES
• Rugged, high-quality, all metal housing
• Short length behind panel (11/32"/8.73 mm)
• High ohmic values up to: 2 MΩ
• Extra taps AVAILABLE
RoHS
COMPLIANT
This Model 159 is only for maintenance purposes. It is not
recommended for new designs and will be obsolete in a near
future.
ELECTRICAL SPECIFICATIONS
PARAMETER
Standard Ohmic Values Range
Tolerance
Linearity (Independent)
Output Smoothness
Power Rating (at 40 °C Ambient)
Electrical Angle
Insulation Resistance
Dielectric Strength
Minimum Voltage
Temperature Coefficient of Resistance
500 Ω to 2 MΩ
Standard: ± 20 %
Special: ± 5 %
STANDARD
BEST PRACTICAL
± 0.5 %
± 0.25 %
0.1 % maximum
3.5 W
derated to zero at 150 °C
340° ± 4°
1000 MΩ minimum 500 V_DC
1000 V_RMS, 60 Hz
0.5 % max.
± 100 ppm/°C
ORDERING INFORMATION/DESCRIPTION
The Models 159 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
159
B
10K
BO10
MODEL
MOUNTING
OHMIC VALUE
PACKAGING
B = Bushing
S = Servo
Box of 10 pieces
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, high torque, 1/8 shaft - 1/4 - 32 bushing, stops, non - linear functions, etc., state these on your order
SAP PART NUMBERING GUIDELINES
159
S
MODEL
STYLE
Servo
205
OHMIC VALUE
2 MΩ
B10
PACKAGING
Box of 10 pieces
www.vishay.com
18
For technical questions, contact: [e-mail]
Document Number: 57041
Revision: 07-Sep-07