MODEL100 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 1 5/16 (33.3 mm) Single Turn Wirewound Precision Potentiometer

Model 100
Vishay Spectrol
1 ⁵/₁₆" (33.3 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Gangable up to 6 sections
• Extra taps on request
• Bushing and servo mount types available
• Ohmic value range: 5 Ω up to 35 kΩ
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance:
Tolerance: 50 Ω and Above
Below 50 Ω
End Voltage
Linearity (Independent):
5 Ω to 100 Ω
100 Ω to 500 Ω
500 Ω to 3 kΩ
3 kΩ to 15 kΩ
15 kΩ and above
Noise
Electrical Angle
Power Rating
Insulation Resistance
Dielectric Strength
Taps (Extra)
Phasing
Absolute Minimum Resistance
STANDARD
5 Ω to 20 kΩ
±3%
±5%
SPECIAL
to 35 kΩ
±1%
±3%
Linearity x total applied voltage for total resistance above 20 Ω.
2.0 % of total applied voltage for 20 Ω and below
STANDARD
± 1.0 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
BEST PRACTICAL
± 0.50 %
± 0.35 %
± 0.25 %
± 0.20 %
± 0.15 %
100 Ω ENR (MIL-R-12934)
352° ± 2°
2.75 W at 40 °C ambient
100 MΩ min, 500 V_DC
1000 V_RMS, 60 Hz
Up to 13 (position tolerance: ± 1°)
CCW taps of multiple sections aligned with
CCW tap of section 1 to ± 1°
Linearity x total resistance or 0.5 Ω, whichever is greater
RoHS
COMPLIANT
ORDERING INFORMATION/DESCRIPTION
The Model 100 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your
order, please state:
100
S
1
10K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
Up to 6 sections
Box of 1 piece
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
100
B
2
MODEL
STYLE
NUMBER OF
SECTIONS
Bushing
203
OHMIC VALUE
Section N^O 1: 20K
502
OHMIC VALUE
Section N^O 2: 5K
B01
PACKAGING
Box of 1 piece
www.vishay.com
80
For technical questions, contact: [e-mail]
Document Number: 57034
Revision: 28-Jun-07