MMU01020C2202FB300 Datasheet, PDF (1/13 Pages) Vishay Siliconix – Professional MELF Resistors

MMU 0102, MMA 0204, MMB 0207 - Professional
Vishay Beyschlag
Professional MELF Resistors
MMU 0102, MMA 0204 and MMB 0207 professional thin film
MELF resistors are the perfect choice for most fields of
modern professional electronics where reliability and stability
is of major concern. The typical applications in the fields of
automotive, telecommunication and medical equipment
reflect the outstanding level of proven reliability.
FEATURES
 Approved to EN 140401-803
 AEC-Q200 qualified
 Advanced thin film technology
 Excellent overall stability: Exceeds class 0.25
 Matte Sn termination on Ni barrier layer
 Compliant to RoHS Directive 2011/65/EU
APPLICATIONS
 Automotive
 Telecommunication
 Industrial
 Medical equipment
METRIC SIZE
DIN
0102
CECC
RC 2211M
0204
RC 3715M
0207
RC 6123M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MMU 0102
MMA 0204
MMB 0207
CECC size
RC 2211M
RC 3715M
RC 6123M
Resistance range
0.22  to 2.21 M; 0 
0.22  to 10 M; 0 
0.1  to 15 M; 0 
Resistance tolerance
± 5 %; ± 2 %; ± 1 %; ± 0.5 %
± 5 %; ± 1 %; ± 0.5 %
± 5 %; ± 2 %; ± 1 %; ± 0.5 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K
± 100 ppm/K; ± 50 ppm/K;
± 25 ppm/K
Operation mode
Rated dissipation, P₇₀ ⁽¹⁾
Operating voltage, U_max. AC/DC
Permissible film temperature, _F max.
Operating temperature range
Max. resistance change at P₇₀
for resistance range,
R/R max., after:
Standard
Power
0.2 W
0.3 W
150 V
125 °C
155 °C
- 55 °C
to 125 °C
- 55 °C
to 155 °C
0.22  to 221 k
Standard
Power
0.25 W
0.4 W
200 V
125 °C
155 °C
- 55 °C
to 125 °C
- 55 °C
to 155 °C
0.22  to 332 k
Standard
Power
0.4 W
1.0 W ⁽²⁾
300 V
125 °C
155 °C
- 55 °C
to 125 °C
- 55 °C
to 155 °C
0.22  to 1 M
1000 h
 0.15 %
 0.25 %
 0.15 %
 0.25 %
 0.15 %
 0.25 %
8000 h
 0.3 %
 0.5 %
 0.3 %
 0.5 %
 0.3 %
 0.5 %
225 000 h
1%
-
1%
-
1%
-
Permissible voltage
against ambient (insulation):
1 min; U_ins
Continuous
200 V
75 V
300 V
75 V
500 V
75 V
Failure rate: FIT_observed
 0.1 x 10^-9/h
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
(1) _{The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heatflow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a
high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board
materials may be required to maintain the reliability of the assembly.
(2) _{Specified power rating requires dedicated heat-sink pads.}
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 28713
14
Revision: 05-Mar-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000