MLV0402E3 Datasheet, PDF (1/3 Pages) Vishay Siliconix – SMD 0402 Multilayer Varistor

www.vishay.com
MLV0402E3
Vishay BCcomponents
SMD 0402 Multilayer Varistor
QUICK REFERENCE DATA
PARAMETER
VALUE
Maximum continuous voltage
DC
AC
Maximum clamping voltage
at 1 A
Capacitance range
(at 1 MHz)
Maximum energy (10/1000 μs)
Maximum peak current
Operating temperature range
Weight
5.6 to 18.0
4.0 to 14.0
15.5 to 40
90 to 360
0.05
20
-55 to 125
± 0.0015
UNIT
V
V
V
pF
J
A
°C
g
FEATURES
• Surface mount multilayer surge suppressor
• Inherent bidirectional clamping
• Excellent energy/volume ratio
• Suitable for reflow soldering
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
• Data lines and I/O port protection
• Protection against ESD transients
• On-board protection of IC’s and transistors
• Modem protection
• LCD protection
DESCRIPTION
Size 0402 (1005M) multilayer chip varistor with NiSn
terminations.
PACKAGING
Available in 8 mm paper tape, component pitch 4 mm on
180 mm reels containing 10 000 pieces.
ELECTRICAL DATA AND ORDERING INFORMATION
WORKING VOLTAGE
V_RMS
V
V_DC
V
< 10 μA
BREAKDOWN
VOLTAGE
V_b
V
1 mA
MAXIMUM
CLAMPING
VOLTAGE
V_C
V
1 A, 8/20 μs
4.0
5.6
7.1 to 9.3
15.5
TYPICAL
CAPACITANCE
C
pF
1 MHz
360
7.0
9.0
11.0 to 14.0
20.0
230
11.0
14.0
16.0 to 20.0
30.0
120
14.0
18.0
23.0 to 28.0
40.0
90
Notes
• Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
• Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
• Parts are not recommended for automotive applications.
PART NUMBER
SAP
MLV0402E3
0403T
0703T
1103T
1403T
Revision: 22-Apr-15
1
Document Number: 29107
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000