MKT1817_08 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Metallized Polyester Film Capacitors Related Document: IEC 60384-2

MKT 1817
Vishay Roederstein
Metallized Polyester Film Capacitors
Related Document: IEC 60384-2
Dimensions in millimeters
L
Max.
W Max.
H
0.6
Max.
6.0 ^{- 1}
± 0.4
Marking
FEATURES
Product is completely lead (Pb)-free.
Product is RoHS compliant.
CAPACITANCE RANGE
1000pF to 1.0µFF
CAPACITANCE TOLERANCES
± 20% (M), ± 10% (K), ± 5% (J)
RATED VOLTAGES (UR)
63 VDC, 100 VDC, 250 VDC, 400 VDC
e3
RoHS
COMPLIANT
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ
40 VAC, 63 VAC, 160 VAC, 200 VAC
5.0 ± 0.4
Ø 0.5
MAIN APPLICATIONS
Blocking, bypassing, filtering and timing, high frequency
coupling and decoupling for fast digital and analog ICs,
interference suppression in low voltage applications.
MARKING
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
DIELECTRIC
Polyester film
ELECTRODES
Vacuum deposited aluminum
COATING
Flame retardant plastic case (UL-class 94 V-0), green,
epoxy resin sealed
CONSTRUCTION
Extended metallized film (refer to general information)
LEADS
Tinned wire
IEC TEST CLASSIFICATION
55/100/56, according to IEC 60068
TEST VOLTAGE (ELECTRODE/ELECTRODE)
1.6 x U_R for 2 s
OPERATING TEMPERATURE RANGE
- 55°C to + 100°C
INSULATION RESISTANCE
Measured with 100 VDC
(63 VDC series measured at 50 VDC) after one minute
For C ≤ 0.33µF and U_R > 100 VDC:
7500 MΩ minimum value (100,000 MΩ typical value)
For C ≤ 0.33µF and U_R ≤ 100 VDC:
3750 MΩ minimum value (50,000 MΩ typical value)
TIME CONSTANT
Measured with 50 VDC after one minute
For C > 0.33µF:
1250 s minimum value (10,000 s typical value)
CAPACITANCE DRIFT
Up to + 40°C, ± 1.5% for a period of two years
DERATING FOR DC AND AC. CATEGORY VOLTAGE U_C
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.8 U_R
SELF INDUCTANCE
~ 6nH measured with 2mm long leads
PULL TEST ON LEADS
≥ 30 N in direction of leads according to IEC 60068-2-21
RELIABILITY
Operational life > 300,000h
Failure rate < 2 FIT (40°C and 0.5 x U_R)
For further details, please refer to the general information
available at www.vishay.com/doc?26033.
MAXIMUM PULSE RISE TIME
PCM
(mm)
63 VDC
Maximum Pulse Rise Time d_v/d_t [V/µs]
100 VDC
250 VDC
400 VDC
5
15
24
44
If the maximum pulse voltage is less than the rated voltage higher d_v/d_t values can be permitted.
DISSIPATION FACTOR TAN δ
MEASURED AT
1kHz
10kHz
100kHz
C ≤ 0.1µF
8 x 10^-3
15 x 10^-3
25 x 10^-3
Maximum values
100
0.1µF < C ≤ 1.0µF
8 x 10^-3
15 x 10^-3
—
Document Number: 26032
Revision: 05-Jul-05
For technical questions contact; [e-mail]
www.vishay.com
1