MKP1840 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16

MKP 1840
Vishay Roederstein
Metallized Polypropylene Film Capacitor
Related Document: IEC 60384-16
MAIN APPLICATIONS:
Pulse operations, deflection circuits in TV sets
(S-correction), SMPS and thyristor circuits, storage, filter,
timing, sample and hold circuits.
MARKING:
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
DIELECTRIC:
Polypropylene film
ELECTRODES:
Vacuum deposited aluminum
COATING:
Flame retardant plastic case (UL-class 94 V-0), blue,
epoxy resin selaled
Flame class B according to IEC 60065 available on request
CONSTRUCTION:
Extended metallized film (refer to general information)
LEADS:
Tinned wire
IEC TEST CLASSIFICATION:
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE:
- 55°C to + 100°C
CAPACITANCE RANGE:
4700pF to 10µF
CAPACITANCE TOLERANCES:
± 20% (M), ± 10% (K), ± 5% (J)
RATED VOLTAGES (U_R):
100 VDC, 160 VDC, 250 VDC, 400 VDC, 630 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:
63 VAC, 100 VAC, 160 VAC, 220 VAC, 250 VAC
TEST VOLTAGE (ELECTODE/ELECTRODE):
1.6 x U_R for 2 s
INSULATION RESISTANCE:
Measured at 100 VDC after one minute
For C ≤ 0.33µF:
100,000 MΩ minimum value
25,000 MΩ (U_R = 100 VDC)
MAXIMUM PULSE RISE TIME
L
Max.
Dimensions in millimeters
W
Max.
Marking
0.6
H
Max.
6^-1
pcm
± 0.4
Ød
± 0.4
PCM
W
ød
5
0.5
7.5/10
0.6
15 - 37.5
< 16
0.8
15 - 37.5
≥ 16
1.0
TIME CONSTANT:
Measured at 100 VDC after one minute
For C > 0.33µF:
30,000 s minimum value
TEMPERATURE COEFFICIENT:
- 250 x 10^-6/°C (typical value)
CAPACITANCE DRIFT:
Up to + 40°C, < 0.5% for a period of two years
DIELECTRIC ABSORPTION:
0.05% (typical value) according to IEC 60384-1
DERATING FOR DC AND AC.
CATEGORY VOLTAGE U_C:
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.7 U_R
SELF INDUCTANCE:
~ 6 nH measured with 2mm long leads
PULL TEST ON LEADS:
≥ 30 N in direction of leads according to IEC 60068-2-21
RELIABILITY:
Operational life > 300,000 h
Failure rate < 5 FIT (40°C and 0.5 x U_R)
For further details, please refer to the general information
provided in this catalog.
PCM
(mm)
5
7.5
10
15
22.5
27.5
37.5
100 VDC
390
—
—
—
—
—
—
Maximum pulse rise time d_v/d_t [V/µs]
160 VDC
250 VDC
400 VDC
—
—
—
240
300
—
175
220
380
100
125
200
60
75
120
45
60
95
30
40
65
630 VDC
—
—
510
280
160
120
85
If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.
Document Number 26018
Revision 01-Dec-03
For technical questions, contact [e-mail]
www.vishay.com
71