MKP1839 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16

MKP 1839
Vishay Roederstein
Metallized Polypropylene Film Capacitor
Related Document: IEC 60384-16
MAIN APPLICATIONS:
Pulse operations, deflection circuits in TV sets
(S-correction), SMPS and thyristor circuits, storage, filter,
timing and sample and hold circuits.
MARKING:
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
DIELECTRIC:
Polypropylene film
ELECTRODES:
Vacuum deposited aluminum
COATING:
Plastic-wrapped, epoxy resin sealed
CONSTRUCTION:
Extended metallized film (refer to general information)
LEADS:
Tinned wire
IEC TEST CLASSIFICATION:
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE:
- 55°C to + 100°C
CAPACITANCE RANGE:
1000pF to 10µF
CAPACITANCE TOLERANCES:
± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F)
± 1% only up to maximum body diameter of 14.5 x 31.5mm
RATED VOLTAGES (U_R):
160 VDC, 250 VDC, 400 VDC, 630 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:
100 VAC, 160 VAC, 220 VAC, 250 VAC
TEST VOLTAGE (ELECTRODE/ELECTRODE):
1.6 x U_R for 2 s
INSULATION RESISTANCE:
Measured at 100 VDC after one minute
For C ≤ 0.33µF:
100,000 MΩ minimum value
40.0 ± 5.0
d
0.6
0.8
1.0
Dimensions in millimeters
L
Max.
Ød
40.0 ± 5.0
D
Max.
D
≤ 9.0
< 16.5
≥ 16.5
L
≤ 19.0
>26.5
≥ 26.5
TIME CONSTANT:
Measured at 100 VDC for one minute
For C > 0.33µF:
30,000 s minimum value
TEMPERATURE COEFFICIENT:
- 250 x 10^-6/°C (typical value)
CAPACITANCE DRIFT:
Up to + 40°C, < 0.5% for a period of two years
DERATING FOR DC AND AC.CATEGORY VOLTAGE U_C:
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.7 U_R
SELF INDUCTANCE:
~ 12 nH measured with 6mm long leads
PULL TEST ON LEADS:
≥ 20 N in direction of leads according to IEC 60068-2-21
BEND TEST ON LEADS:
2 bends through 90° with half of the force used in pull test
DIELECTRIC ABSORPTION:
0.05% (typical value) according to IEC 60384-1
RELIABILITY:
Operational life > 300,000 h
Failure rate < 5 FIT (40°C and 0.5 x U_R)
For further details, please refer to the general information
provided in this catalog.
MAXIMUM PULSE RISE TIME
CAPACITOR
LENGTH (mm)
11
14
19
26.5
31.5
41.5
160 VDC
240
175
100
60
45
30
Maximum pulse rise time d_v/d_t [V/µs]
250 VDC
400 VDC
300
515
220
380
125
200
75
120
60
95
40
65
If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.
www.vishay.com
68
For technical questions, contact [e-mail]
630 VDC
700
510
280
160
120
85
Document Number 26022
Revision 01-Dec-03