MKP1837 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Metallized Polypropylene Film Capacitor

MKP 1837
Vishay Roederstein
Metallized Polypropylene Film Capacitor
Related Document: IEC 60384-16
MAIN APPLICATIONS:
Oscillator, timing and LC/RC filter circuits, high frequency
coupling/decoupling, sample and hold circuits.
MARKING:
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
DIELECTRIC:
Polypropylene film
ELECTRODES:
Vacuum deposited aluminum
COATING:
Flame retardant plastic case (UL-class 94 V-0), blue, epoxy
resin sealed
CONSTRUCTION:
Extended metallized film (refer to general information)
LEADS:
Tinned wire
IEC TEST CLASSIFICATION:
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE:
- 55°C to + 100°C
CAPACITANCE RANGE:
0.01µF to 0.1µF
CAPACITANCE TOLERANCES:
± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F)
RATED VOLTAGES (U_R):
160 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:
100 VAC
TEST VOLTAGE (ELECTRODE/ELECTRODE):
1.6 x U_R for 2 s
INSULATION RESISTANCE:
Measured at 100 VDC after one minute
100,000 MΩ minimum value
DISSIPATION FACTOR TAN δ
MEASURED AT
1kHz
10kHz
100kHz
L
Max.
Dimensions in millimeters
W
Max.
H
0.6
Max.
Marking
5.0 ± 0.4
6.0^-1
± 0.4
Ø 0.5
TEMPERATURE COEFFICIENT:
- 250°C x 10^-6/°C (typical value)
CAPACITANCE DRIFT:
Up to + 40°C, < 0.5% for a period of two years
MAXIMUM PULSE RISE TIME:
d_v/d_t = 390 V/µs
If the maximum pulse voltage is less than the rated
voltage, higher dv/dt values can be permitted.
DERATING FOR DC AND AC.CATEGORY VOLTAGE U_C:
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.7 U_R
SELF INDUCTANCE:
~ 6 nH measured with 2mm long leads
PULL TEST ON LEADS:
≥ 30 N in direction of leads according to IEC 60068-2-21
DIELECTRIC ABSORPTION:
0.05% (typical value) acc. to IEC 60384-1
RELIABILITY:
Operational life > 300,000 h
Failure rate < 5 FIT (40°C and 0.5 x U_R)
For further details, please refer to the general information
provided in this catalog.
C ≤ 0.1µF
0.4 x 10^-3
0.6 x 10^-3
4 x 10^-3
Maximum values
www.vishay.com
66
For technical questions, contact [e-mail]
Document Number 26017
Revision 01-Dec-03