MKC1862 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metallized Polycarbonate Film Capacitor Related Document: IEC 60 384-6

MKC 1862*
Vishay Roederstein
Metallized Polycarbonate Film Capacitor
Related Document: IEC 60 384-6
MAIN APPLICATIONS:
Storage, filter, timing and integrating circuits.
MARKING:
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
DIELECTRIC:
Polycarbonate film
Dimensions in mm
L Max.
W Max.
Marking
H
Max.
0.6
ELECTRODES:
Vacuum deposited aluminum
COATING:
Flame retardant plastic case (UL-class 94 V-0), red,
epoxy resin sealed
± 0.4
6.0^-1
pcm ± 0.4
0.8
CONSTRUCTION:
Extended metallized film (refer to general information)
TIME CONSTANT:
LEADS:
Tinned wire
IEC TEST CLASSIFICATION:
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE:
- 55°C to + 100°C
CAPACITANCE RANGE:
0.01µF to 10µF
CAPACITANCE TOLERANCES:
± 20% (M), ± 10% (K), ± 5% (J)
RATED VOLTAGES (U ):
R
63 VDC, 100 VDC, 250 VDC, 400 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:
Measured at 100 VDC (63 VDC series measured at
50 VDC) after one minute
For C > 0.33µF and U_R > 100 VDC:
10,000 s minimum value (40,000 s typical value)
For C > 0.33µF and U_R ≤ 100 VDC:
5000 s minimum value (15,000 s typical value)
CAPACITANCE DRIFT:
Up to + 40°C, ± 1% for a period of two years
DERATING FOR DC AND AC. CATEGORY VOLTAGE U_C:
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.8 U_R
SELF INDUCTANCE:
~ 6 nH measured with 2mm long leads
40 VAC, 63 VAC, 160 VAC, 200 VAC
PULL TEST ON LEADS:
TEST VOLTAGE (ELECTRODE/ELECTRODE):
≥ 30 N in direction of leads according to IEC 60068-2-21
1.6 x U_R for 2 s
INSULATION RESISTANCE:
Measured at 100 VDC (63 VDC series measured at
50 VDC) after one minute
For C ≤ 0.33µF and U_R > 100 VDC:
30,000 MΩ minimum value (100,000 MΩ typical value)
For C ≤ 0.33µF and U_R ≤ 100 VDC:
15,000 MΩ minimum value (50,000 MΩ typical value)
BEND TEST ON LEADS:
2 bends through 90° with half of the force used in pull test
RELIABILITY:
Operational life > 300,000 h
Failure rate < 1 FIT (40°C and 0.5 x U_R)
For further details, please refer to the general information
provided in this catalog.
MAXIMUM PULSE RISE TIME
PCM
Maximum pulse rise time d_v/d_t [V/µs]
(mm)
63 VDC
100 VDC
250 VDC
400 VDC
10
17
23
38
61
15
9
13
21
33
22.5
6
8
13
20
27.5
5
6
10
16
If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.
Please note: these capacitors are not recommended for new designs
Document Number 26027
Revision 01-Dec-03
For technical questions, contact [e-mail]
www.vishay.com
101