MIF Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film Microwave Resistor

www.vishay.com
MIF
Vishay Electro-Films
Thin Film Microwave Resistor
Product may not be to scale
The MIF resistor chips on alumina are designed with low
shunt capacitance. Resistor geometrics are compatible with
strip lines, making them ideally suited for microwave
circuits.
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The MIFs are 100 % electrically tested and
visually inspected to MIL-STD-883, method 2032 class H
or K.
FEATURES
• Wire bondable
• High frequency
• Small single chip size: 0.016" x 0.020"
• Microwave resistance range: 20  to 100 
• Overall resistance range: 20  to 2 k
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
• Power: 50 mW
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI MIF chip resistors provide excellent high
frequency response and are ideally suited for prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Resistance Range
20 to 100
Tolerances
± 1, ± 5, ± 10, ± 20 standard
TCR
± 100
UNIT

%
ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, + 125 °C, 25 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure + 150 °C, 1000 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to Zero at 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 20 typ.
± 0.5 max. R/R
± 0.5 max. R/R
- 55 to + 125
± 0.25 max. R/R
± 0.5 max. R/R
400
10¹² min.
100 max.
0.050 max.
± 0.25 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 02-May-13
1
Document Number: 61038
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000