MID Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film Microwave Resistor

www.vishay.com
MID
Vishay Electro-Films
Thin Film Microwave Resistor
Product may not be to scale
The MID resistor chips on alumina are designed for low
shunt capacitance applications with 200 mW power
requirements.
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated Thin Film equipment and manufacturing
technology. The MIDs are 100 % electrically tested and
visually inspected to MIL-STD-883, method 2032 class H
or K.
FEATURES
• Wire bondable
• High frequency
• Chip size: 0.050" x 0.050"
• Microwave resistance range: 18  to 500 
• Overall resistance range: 2  to 100 k
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Power: 200 mW
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI MIC chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping. Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
Resistance Range
Tolerances
TCR
VALUE
2 to 100K
1
± 25; ± 50; ± 100; ± 200
Note
• Only 18  to 500  are standard strip line designs for microwave applications
UNIT

%
ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, + 125 °C, 100 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure + 150 °C, 1000 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to Zero at 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 20 typ.
± 0.1 max. R/R
± 0.2 max. R/R
- 55 to + 125
± 0.1 max. R/R
± 0.2 max. R/R
400
10¹² min.
100 max.
0.200 max.
± 0.1 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 18-Apr-13
1
Document Number: 61076
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000