English
Language : 

MIC_15 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film Microwave Resistor
www.vishay.com
MIC
Vishay Electro-Films
Thin Film Microwave Resistor
Product may not be to scale
The MIC resistor chips on alumina are designed with low
shunt capacitance. Most lower value resistor geometrics are
compatible with strip lines, making them ideally suited for
microwave circuits.
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated Thin Film equipment and manufacturing
technology. The MICs are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
• Wire bondable
• High frequency
• Small single chip size: 0.020" x 0.040"
• Case: 0402
• Microwave resistance range: 20  to 1 k
• Overall resistance range: 20  to 20 k
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI MIC chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
Resistance Range
Tolerances
TCR
VALUE
2 to 20K
±1
± 25, ± 50, ± 100, ± 200
Note
• Only 20  to 1 k are standard strip line designs for microwave applications
UNIT

%
ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106
Stability, 1000 h, + 125 °C, 62 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure + 150 °C, 1000 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to Zero at 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 20 typ.
± 0.1 max. R/R
± 0.2 max. R/R
- 55 to + 125
± 0.1 max. R/R
± 0.2 max. R/R
400
1012 min.
100 max.
0.125 max.
± 0.1 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 02-May-13
1
Document Number: 61037
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000