M30L45C_15 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Dual Common Cathode Schottky Rectifier

www.vishay.com
M30L45C
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
TO-220AB
PIN 1
PIN 3
3
2
1
PIN 2
CASE
PRIMARY CHARACTERISTICS
I_F(AV)
2 x 15 A
V_RRM
45 V
E_AS
I_FSM
20 mJ
280 A
V_F at I_F = 15 A
0.46 V
T_J max.
150 °C
Package
TO-220AB
Diode variations
Common cathode
FEATURES
• Power pack
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Solder dip 260 °C max., 40 s
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
MECHANICAL DATA
Case: TO-220AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix for consumer grade, meets JESD 201 class 1A
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum

MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (fig.1)
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode
Peak repetitive reverse current per diode at t_p = 2 μs, 1 kHz
Non-repetitive avalanche energy at 25 °C, I_AS = 2 A, per diode
Operating junction and storage temperature range
SYMBOL
V_RRM
I_F(AV)
I_FSM
I_RRM
E_AS
T_J, T_STG
M30L45C
45
30
15
280
1.0
20
-65 to +150
UNIT
V
A
A
A
mJ
°C
Revision: 17-Aug-15
1
Document Number: 89045
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000